GT-R seats
 

So my parents are planning to buy the V-spec or 2012 model seats for their GT-R. I was wondering if the stock GT-R seats would fit in my Z.

I know that the rails or whatever have to swapped but just curious.

lolled.

:bowrofl:

:tiphat:

:bowrofl: :roflpuke2: :owned:

eurodance

Why so mean. I thought you were cool.

http://www.theallmiapodcast.com/wp-c...-u-mad-bra.jpg

Let me translate for mustang, I'm pretty sure you're one of the very few people on the forums that has both a GTR and a 370z readily available to you. Why not just measure it yourself then?

i****ing<3usteve :bowrofl::roflpuke2::bowrofl:

yea this^^

Why don't you try it out and let us know. It's not like you buying seats not knowing if they will fit. You already have them. A simple fit test will do.

my guess is the brackets won't match but the seats will fit. you'll probably just need to fab up some brackets and wire in the power functions

Hehe, that's a very good point. I was originally going to say "Nailed it!" but I didn't want to be mean. But you got a point there :icon17:

Poor Vegitto! Just asking a innocent question. But it is funny.

clearly, the easiest thing to do would be, buy a 2012 GTR-SPECV, and then rebuild the entire Z around the Seats and cockpit of the GTR.

That's also the cheapest option!

don't forget to repaint the Z for $12,000

:tup:

I was more talking about the brackets and power and wiring not the seats fitting inside it. :shakes head:

+ we don't have the GT-R at the moment. went in for routine checkup dealership went OMG GEARBOX IS MAKING TOO MUCH NOISE ITS BROKEN WE MUST ORDER NEW GEARBOX

have you been launching it repeatedly for hours on end? cause that's the only way that can happen... :stirthepot:

sorry to hear man. hopefully someone will chime in if they have previous experience, but none the less, your best bet is to measure of and compare the brackets yourself for a definitive answer.

It's a decent question, but you gotta admit the response was a bit funny. :tup:

I hope the GTR repair isn't too expensive, bro. As for the wiring and such, I have no idea if it will work. In this respect, you may be a pioneer if you get it to work, and if you do, I'd love pix of the finished product.

OP, if you have the GTR and the Z, just take both seats out and see how they fit... see what you have to do to make them fit.

Not his fault necessarily. It's his Dad's car. Maybe his Dad's been launching it repeatedly. Or maybe it's defective?

lol my father never ever did a launch controll. I don't think he even know how to.

my mom though mmmm cant trust her.

but I don't think the car ever got launch controlled.

the gearbox is warrantied but god knows how ******* long it will take to be fixed if they will have to replace the entire gearbox.

And didn't nissan go "each gearbox is made to only work on THAT engine" I would lol if engine needs to be shipped to japan.

my father's reaction.

when the new one is on the car. first thing to do is have Tom reinforce it and put intake on aaand bigger intercooler aaand ECU tuning.

he is mad I tell you

yea i was kidding really, there have been a few true failures, the rest are people abusing their cars

wat :confused:

Waffles and chocolate.

hookers and blow?

That is the netherlands not belgium.

wtf, you guys don't have hookers or blow? just waffles and chocolate?


hehe just kidding by the way, i have family in belgium! i love belgian chocolate.

We do have it but not like in the netherlands.

unless you know where to look for. belgium is actually one of the biggest exporters of stuff like pot,XTC,LSD and speed :roflpuke2:

So I would be the first to put the GT-R seats in the Z?

snazzy

as long as you're doing the seats, i think you should take their engine, turbos, brakes, etc.

I don't think the GT-R is getting a new engine mate :roflpuke2: stock brakes cracked after francorchamps. turbos might work somehow since he is thinking about upgrading the turbos :roflpuke2:

insurance would cover it.... it would be vandalism/theft :p

:roflpuke2:

GT-R engine in a 370 but then I would need the gearbox too :roflpuke2:

to add to it. ask the nissan dealership to look up the connecters for the seats (power/airbag stuff) on both cars. They should be able to tell you then if they match.

You will need the right tools to do this build:
-tape measure
-hammer

That ought to cover the build. Be sure to take pictures and write a DIY!

if it works il take pics.

now to wait for my dad to buy dem seats.