Nissan 370Z Forum - Real Carbon-Fiber Dash and Door Inserts

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Real Carbon-Fiber Dash and Door Inserts (http://www.the370z.com/exterior-interior/29549-real-carbon-fiber-dash-door-inserts.html)

See dad, I told you he was legit! :shakes head:

Never believes me!

NOW can I use my allowance money and buy some CF parts?! :bowrofl:

Quote:

Originally Posted by XwChriswX (Post 870126)

See dad, I told you he was legit! :shakes head:

Never believes me!

NOW can I use my allowance money and buy some CF parts?! :bowrofl:

Don't blow your wad in one shot!!

Quote:

Originally Posted by Triple's (Post 870129)

Don't blow your wad in one shot!!

Don't worry, you don't have to worry about her getting pregnant. :tup:

Any weight reduction

Quote:

Originally Posted by Lemers (Post 870215)

Any weight reduction

Since their overlays No.

The service we offer is Not a sticker service. The service we office is actual parts wrapped in carbon fiber with harder, clear coat, fiberglass, carbon fiber and resis. The outcome is buffed to reflect a beautiful shine made of rare high end material. The process is somewhat similar to an auto owner deciding to reuplostrey the cloth interior to leather/suede within their car. instead of actually using cloth or leather, you are having your interior redone in carbon fiber or fiber glass. If an actually mold or unit was sold to consumers rather than wrapping of parts, the outcome would still be the same, which is an interior piece of carbon fiber. These assumption that theae are overlays with doubled sided tape must have you mixed up. We do not use any tape on your parts and this is not a sticker service. Again stages of our services include: Carbon fiber sheet, resins, hardner, clear coat, buff.

The weight of these items will weigh close to factory weight considering most of the Z's interior is made up of plastic. The parts being wrapped in carbon fiber are same mental process of an owner deciding to wrap original material, such as cloth, with leather. We strip the parts down to plastic and prep parts for first lay of fiber layering. This is more of a comestic job than performance due to the fact smaller items are being done, also considering the interior is plastic beneth the cloth or leather for some, it's already light. Finally, we offer and you receive A+ carbon fiber wrap, weave is straight and tight, inspected throughly and finally returned to you.

We can offer complete replacement parts but the cost will be higher due since an original piece is not provided by owner. Meaning we will purchase Nissan parts and send to you upon completion. When you receive your new carbon fiber or fiberglass parts, you can simply sell your stock parts that were replaced in car or you may contact us to attempt to sell them as well.

Good work as always Tony, I'm still trying to get that piece to you ;) just gotta find one. Oh and what is the third pic of, a-pillars?

Who's we? Last time I checked my boy Tony worked by himself. Or are you starting your own little business.

Quote:

Originally Posted by billet370 (Post 870374)

The service we offer is Not a sticker service. The service we office is actual parts wrapped in carbon fiber with harder, clear coat, fiberglass, carbon fiber and resis. The outcome is buffed to reflect a beautiful shine made of rare high end material. The process is somewhat similar to an auto owner deciding to reuplostrey the cloth interior to leather/suede within their car. instead of actually using cloth or leather, you are having your interior redone in carbon fiber or fiber glass. If an actually mold or unit was sold to consumers rather than wrapping of parts, the outcome would still be the same, which is an interior piece of carbon fiber. These assumption that theae are overlays with doubled sided tape must have you mixed up. We do not use any tape on your parts and this is not a sticker service. Again stages of our services include: Carbon fiber sheet, resins, hardner, clear coat, buff.

The weight of these items will weigh close to factory weight considering most of the Z's interior is made up of plastic. The parts being wrapped in carbon fiber are same mental process of an owner deciding to wrap original material, such as cloth, with leather. We strip the parts down to plastic and prep parts for first lay of fiber layering. This is more of a comestic job than performance due to the fact smaller items are being done, also considering the interior is plastic beneth the cloth or leather for some, it's already light. Finally, we offer and you receive A+ carbon fiber wrap, weave is straight and tight, inspected throughly and finally returned to you.

We can offer complete replacement parts but the cost will be higher due since an original piece is not provided by owner. Meaning we will purchase Nissan parts and send to you upon composition. When you receive your new carbon fiber or fiberglass parts, you can simply sell your stock parts that were replaced in car or you may contact us to attempt to sell them as well.

He has done much amazing work over yhe course of my interior that me helping him get the word out is a friendly jesture. Tony has authorized me to discuss the parts but like i said, im not collecting funds and hes a good friend of mine. As you see from preious post in this thread, we have not released any additional information concerning prices and are finalizing last stage with the370.com and price sheet to began accepting requests. I am not in a business of my own and if I was, referring it to as " own little business" kind of sounds disrespectful considering you don't happen to know the slightest bit of information. If you have any issues or conflicts I advise you speak directly to Tony since I have no clue who you are. I'm a forum member/friend helping out the 370z commiunty. I'm tied up with my legal profession to own my own shop and do everything my self. Like anybody else, happen to have a hobby for carbon fiber and Z parts, especially 370z since I happen to own one lol.

This thread is simply to get a few pics out and allow the forums to gain a sense of knowledge about what we offer and answer any questions they may have. You simply not understanding how or where we met or what was what or what is what is has anything to the fact that thread is about carbon fiber parts and service... Not relationships, friends or other information you seem to more interested in. You obviously know Tony, so sure you have seen his amazing skill and work. Good guy and I'm helping him with rep threads for the parts he's done for me. Courtesy takes people a long way and things happen to change.

In for prices. Would be interested in the centre arm rest console bit too (if it's possible?)

Quote:

Originally Posted by chippy (Post 870414)

In for prices. Would be interested in the centre arm rest console bit too (if it's possible?)

Definitely available. I actual get that piece back this week or prehaps next week and can post pictures of pre install and installed. I thought that arnrest would allow the carbon fiber door inserts to flow better throughout the car. List should be done by today no later than Friday though.

Yes I have known Tony a long time, I was the first to get most of his products in my car and have been supporting his business from day 1 by getting the word out for him of his amazing work & customer service. I just thought it was funny how you kept saying we like you were there making the parts with him, lol seibon has a big business making carbon fiber products, so how is little/side business disrespectful? And ya I def do know what I'm talking about, so good day sir :tiphat:

Thanx Jon for the kind words...im trying to ge legit and expand and have been talking to bullit and he is working with me to market my cf...back on topic. =)