Window Motor Problems.. Please help

njhns92 · 12-25-2010, 12:53 AM

My friend and I just installed an injen cold air intake on his 2010 370z touring and everything works fine except for the windows. When we open the door the window goes down a crack like its supposed to but when we close the door the window doesnt close again. I think its because we took the negative terminal off the battery. Anyone know how to fix this problem? any help would be appreciated.. thanks.

Xan · 12-25-2010, 12:55 AM

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

njhns92 · 12-25-2010, 12:58 AM

Dude thank you so much. Ill let you know how it goes your help is very appreciated. Merry Christmas

Xan · 12-25-2010, 01:01 AM

No problem.

Merry Christmas to you too!

TypeOne · 12-25-2010, 11:11 AM

Phew... only because it's Christmas.

Otherwise you would have got flamed out of your *** while people yelled at you to search!

Happy Holidays haha!

12-25-2010, 12:53 AM	#1 (permalink)
njhns92 Base Member Join Date: Dec 2010 Location: California Posts: 2 Drives: Sonata, 370Z, Avalon Rep Power: 15	Window Motor Problems.. Please help My friend and I just installed an injen cold air intake on his 2010 370z touring and everything works fine except for the windows. When we open the door the window goes down a crack like its supposed to but when we close the door the window doesnt close again. I think its because we took the negative terminal off the battery. Anyone know how to fix this problem? any help would be appreciated.. thanks.

12-25-2010, 12:55 AM	#2 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 25	1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. __________________

12-25-2010, 01:01 AM	#4 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 25	No problem. Merry Christmas to you too! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help: Adjusting/aligning window (need more help than just window-reset procedure)	k.alexander	Exterior & Interior	7	03-01-2013 08:12 AM
Motor Oil top up	yawningp	Australia/New Zealand	2	11-03-2010 10:59 PM
Did you have problems with CBE fit?	Lee123	Intake/Exhaust	1	06-21-2010 06:16 PM
Booth Babes of 2009 Essen Motor Show, Los Angeles Auto Show, Tokyo Motor Show etc :D	AK370Z	Gentleman's Club	29	12-07-2009 08:33 PM
Two Problems!!!! Help	Jaws12	Nissan 370Z General Discussions	6	07-15-2009 10:13 PM

12-25-2010, 12:58 AM	#3 (permalink)
njhns92 Base Member Join Date: Dec 2010 Location: California Posts: 2 Drives: Sonata, 370Z, Avalon Rep Power: 15	Dude thank you so much. Ill let you know how it goes your help is very appreciated. Merry Christmas

12-25-2010, 11:11 AM	#5 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1852	Phew... only because it's Christmas. Otherwise you would have got flamed out of your *** while people yelled at you to search! Happy Holidays haha!