JDM rear wiper

Javier · 09-01-2020, 03:05 AM

Joey Z,
You can buy everything, but the problem is the the two wires from the BCM to the wiper motor. The wiper motor has a three wire connector, pin 1 is power , pin 2 not used (not even there), pin 3 is ground and pin 4 is for parking the wiper. You will have to run two wires from the BCM to the hatch on the the left side through the gromet that connects the body to the hatch. Know comes the hard part, I have been unable to find the wires in any manual that shows which connector/s that have the wires that go to the rear wiper motor. One wire from the BCM is for PIN 1 and the other wire is for PIN 4. pin 3 IS EASY IT'S GROUND AND ATTACHES TO THE HATCH DIRECTLY FROM THE MOTOR. If you have any luck finding these two pin locations on the BCM let me know.

Best Regards and good luck
Javier

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear wiper or no rear wiper?	dave	Exterior & Interior	23	09-01-2020 06:50 AM
rear wiper	JayYoon	Exterior & Interior	13	11-12-2010 10:12 AM
Rear wiper?	joshj808	Nissan 370Z General Discussions	22	07-21-2009 07:48 AM
Rear wiper.	Chan Chee Hoe	Nissan 370Z General Discussions	4	05-20-2009 09:40 PM
Rear wiper in the U.S.???	KameezGuru	Nissan 370Z Photos / Spyshots / Video / Media Gallery	4	02-14-2009 12:07 AM

09-01-2020, 03:05 AM	#33 (permalink)
Javier Base Member Join Date: Jan 2010 Location: Illinois Posts: 40 Drives: 09 nissan 370z Rep Power: 10140	Joey Z, You can buy everything, but the problem is the the two wires from the BCM to the wiper motor. The wiper motor has a three wire connector, pin 1 is power , pin 2 not used (not even there), pin 3 is ground and pin 4 is for parking the wiper. You will have to run two wires from the BCM to the hatch on the the left side through the gromet that connects the body to the hatch. Know comes the hard part, I have been unable to find the wires in any manual that shows which connector/s that have the wires that go to the rear wiper motor. One wire from the BCM is for PIN 1 and the other wire is for PIN 4. pin 3 IS EASY IT'S GROUND AND ATTACHES TO THE HATCH DIRECTLY FROM THE MOTOR. If you have any luck finding these two pin locations on the BCM let me know. Best Regards and good luck Javier