Taillight Install Question?

Pelican170 · 11-02-2010, 11:27 AM

Hey Guys,

I am looking into the JDM taillights and looked at the DIY for the removal of these. But my question is, do you really have to take off all those panels just to remove the stock lights and swap with the JDM? From the DIY pics, it looks like you do in order to wire the fog lamp, but if I am just swapping out and back in, cant I just remove the bolts, pull the lights forward, unclip the harness and then plug into the new lights and pop back in? Just want to know what im getting myself into before i order. Any info helps, thanks.

kielbasa16 · 11-02-2010, 11:52 AM

Quote:

Originally Posted by Pelican170

Hey Guys,

I am looking into the JDM taillights and looked at the DIY for the removal of these. But my question is, do you really have to take off all those panels just to remove the stock lights and swap with the JDM? From the DIY pics, it looks like you do in order to wire the fog lamp, but if I am just swapping out and back in, cant I just remove the bolts, pull the lights forward, unclip the harness and then plug into the new lights and pop back in? Just want to know what im getting myself into before i order. Any info helps, thanks.

To get to the bolts that hold the tail lights in place you do have to remove a couple of the panels in the trunk. Ive done it a few times and its definitely not something you need to hesitate over, easy.

kenchan · 11-02-2010, 11:54 AM

yah, you do need to remove the trunk liner. it's a pita imho but not too bad. do your rear fog lamp, rear camera, and dynamat while the liner's out.

GZ3 · 11-02-2010, 11:55 AM

yes its a MUST to remove some panels....there is (1) screw that holds the light in place behind all the panels and the light will not come out any other way...I left the screw off after i did this incase i did any more changes it would just pop off remove the visible trunk screws

kielbasa16 · 11-02-2010, 11:57 AM

Quote:

Originally Posted by GZ3

yes its a MUST to remove some panels....there is (1) screw that holds the light in place behind all the panels and the light will not come out any other way...I left the screw off after i did this incase i did any more changes it would just pop off remove the visible trunk screws

Thats actually a pretty cool idea, I dont imagine you get any rattles or anything?

kenchan · 11-02-2010, 01:23 PM

no but it will void you car's warranty.

Pelican170 · 11-03-2010, 08:46 AM

Hey thanks for the info. I realized after i took a look at my trunk that the 3rd screw is behind the panel. Do you guys thing there is anyway to just bend the panel a little and get the screw out, instead of having to actually remove it. Either way, doesnt look like its too big of a deal. Thanks again.

11-02-2010, 11:27 AM	#1 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 15	Taillight Install Question? Hey Guys, I am looking into the JDM taillights and looked at the DIY for the removal of these. But my question is, do you really have to take off all those panels just to remove the stock lights and swap with the JDM? From the DIY pics, it looks like you do in order to wire the fog lamp, but if I am just swapping out and back in, cant I just remove the bolts, pull the lights forward, unclip the harness and then plug into the new lights and pop back in? Just want to know what im getting myself into before i order. Any info helps, thanks.

11-02-2010, 11:55 AM	#4 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 21	yes its a MUST to remove some panels....there is (1) screw that holds the light in place behind all the panels and the light will not come out any other way...I left the screw off after i did this incase i did any more changes it would just pop off remove the visible trunk screws __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
taillight removal	DAGRACING	DIY Section (Do-It-Yourself)	2	07-08-2010 04:33 PM
Stock Nav install question	Dr. JD	Nissan 370Z General Discussions	11	06-05-2010 09:23 AM
Taillight Newb	hfrog355	DIY Section (Do-It-Yourself)	2	05-04-2010 11:32 PM
noob question on sub/amp install.	Snakes709	Audio & Video	2	03-20-2010 03:41 PM
Where can I buy taillight tint for my 370Z?	NewYorkJon34	Exterior & Interior	18	09-01-2009 11:48 AM

11-02-2010, 11:54 AM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, you do need to remove the trunk liner. it's a pita imho but not too bad. do your rear fog lamp, rear camera, and dynamat while the liner's out.

11-02-2010, 01:23 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	no but it will void you car's warranty.

11-03-2010, 08:46 AM	#7 (permalink)
Pelican170 Track Member Join Date: Jul 2010 Location: Sandy Hook, CT Posts: 972 Drives: Nissan 370z Nismo Rep Power: 15	Hey thanks for the info. I realized after i took a look at my trunk that the 3rd screw is behind the panel. Do you guys thing there is anyway to just bend the panel a little and get the screw out, instead of having to actually remove it. Either way, doesnt look like its too big of a deal. Thanks again.