Nissan 370Z Forum - Fujimura cf Rear diffuser installed! (with pics)( AK370Z)

Page 5 of 5

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Fujimura cf Rear diffuser installed! (with pics)( AK370Z) (http://www.the370z.com/exterior-interior/24463-fujimura-cf-rear-diffuser-installed-pics-ak370z.html)

kenchan

09-13-2013 11:30 AM

Quote:

Originally Posted by OldFart (Post 2486227)

I doubled up the tape along the top as you told AK to do, once it grabbed it wasn't going to let go. I can't complain at all about the fitment though, along with the price. Spats are next, already painted so just a matter of installing, but I wanted to get this on first.

sounds good. which tape did you use?

OldFart

09-13-2013 12:07 PM

Quote:

Originally Posted by kenchan (Post 2486241)

sounds good. which tape did you use?

I used the clear 3/4" 3m VHB, bought it off of amazon. I think I bought the 15yard version since I had the EVOR front lip, this and the spats to do..

kenchan

09-13-2013 02:03 PM

Quote:

Originally Posted by OldFart (Post 2486327)

I used the clear 3/4" 3m VHB, bought it off of amazon. I think I bought the 15yard version since I had the EVOR front lip, this and the spats to do..

sounds good. :tup: that might be the same one Beemaz used. :D

kenchan

09-23-2013 06:27 PM

i suggest you guys put a dab of thread-lock blue on the mounting bolts that go on the bottom since you dont want to crank the fasteners too tight (can crack the resin).

TreeSemdyZee

09-28-2013 03:36 PM

Need educated patience help

Need experienced advice. I just got my car back from the bodyshop yesterday and I've had my Fujimara diffuser staring at me for one and a half months and I'm dying to install it. Should I wait for awhile and let the paint cure a bit? The bodyshop told me to wait two months before I waxed, etc.

I don't want to mess up the paint with the VHB tape, so I need advice. Either you feed my addiction or teach me patience. :mad:

Zoren 370

06-26-2014 10:26 PM

Im just curious why was the thread of Evor 370z rear diffuser the link on your page 1 post is already closed?

Any of our sponsored dealers authorized distributor of fujimura rear diffusers?

speedfreek

04-27-2015 01:45 PM

I will be following this guide hopefully in a few weeks when my Fujimura diffuser finally shows up.

I ordered 5 yards of the 3M 5952 (0.75 inch wide) tape for the job.

Should I have ordered a different width? 0.75 in. seems to be what most everyone else has used.

Also was there any prep work to the clear coat needed? Or just install it straight out of the box?

Solid370z

04-17-2016 06:30 PM

How many of you actually drilled holes for the smaller screws?

acelesson

04-17-2016 07:29 PM

anyone have an amazon link to the tape?

Trips

04-17-2016 07:47 PM

Quote:

Originally Posted by acelesson (Post 3461915)

anyone have an amazon link to the tape?

https://www.amazon.com/s/ref=nb_sb_s...49%2Caps%2C204

acelesson

04-17-2016 08:20 PM

Quote:

Originally Posted by Trips (Post 3461933)

https://www.amazon.com/s/ref=nb_sb_s...49%2Caps%2C204

I see a lot of people here using the 3M 5952 version. what Is the difference between the 4941 and 5952?

madwi

04-17-2016 08:30 PM

Quote:

Originally Posted by Solid370z (Post 3461884)

How many of you actually drilled holes for the smaller screws?

I did.

acelesson

04-24-2016 03:23 PM

Installed mine a couple days ago. Tape should be cured by now (hopefully)

https://scontent-ord1-1.xx.fbcdn.net...57&oe=57A1C13A

https://scontent-ord1-1.xx.fbcdn.net...90&oe=579F151F

COSMO

04-24-2016 04:47 PM

Lose the HKS emblem and cut your grass man!!! lol

All times are GMT -5. The time now is 03:29 AM.

Page 5 of 5

« First

Show 40 post(s) from this thread on one page