Headlight Mod for 370z - Real Pictures Inside

stinhambo · 03-12-2009, 11:22 PM

My thoughts are that the LEDs should be along the bottom of the cover stretching from the bottom inside right up to the curved lip section on the outside.

tvfreakazoid · 03-16-2009, 03:07 PM

Just like the Audi's?

Quote:

Originally Posted by stinhambo

My thoughts are that the LEDs should be along the bottom of the cover stretching from the bottom inside right up to the curved lip section on the outside.

stinhambo · 03-17-2009, 12:10 AM

Quote:

Originally Posted by tvfreakazoid

Just like the Audi's?

Yep pretty much. It will then emphasis the width of the car and because the corners are lower towards the middle of the car than the arches, it will look angry too >|

tvfreakazoid · 03-18-2009, 04:00 AM

I agree with you on this one. Hope they make kits that are just as good as the audis.

Quote:

Originally Posted by stinhambo

Yep pretty much. It will then emphasis the width of the car and because the corners are lower towards the middle of the car than the arches, it will look angry too >|

nappymike · 03-13-2009, 07:28 PM

those headlights look bad *** i really want to do this mod

Skorch · 03-19-2009, 12:51 AM

So... Whom do I ship my headlights to that can do this mod for me? Otherwise a DIY guide would be very appreciated

K20A2_S · 03-27-2009, 05:40 PM

Quote:

Originally Posted by Skorch

So... Whom do I ship my headlights to that can do this mod for me? Otherwise a DIY guide would be very appreciated

seriously, how is this not a DIY guide yet?

I did this to my RSX, baked the headldights, opened em up, sanded and painted the inserts black(were chrome), re-seal with real tight clamps and sealant, trim away protruding sealeant,walla..........blacked out JDM headlights for 10 bucks insteed of 500

msl82 · 03-29-2009, 05:11 AM

Quote:

Originally Posted by Skorch

So... Whom do I ship my headlights to that can do this mod for me? Otherwise a DIY guide would be very appreciated

Yes please!!!

I really want to get this done to my car...

Zpil0t6 · 03-30-2009, 08:28 AM

I give credit to anyone that will back your lights open. Its doable but sometimes there will
be a leak thereafter, moisture.

tvfreakazoid · 03-30-2009, 05:07 PM

yea that would suck if it wasn't on properly that over time it will fog up and moister gets in there.

K20A2_S · 04-01-2009, 08:23 PM

Quote:

Originally Posted by Zpil0t6

I give credit to anyone that will back your lights open. Its doable but sometimes there will
be a leak thereafter, moisture.

I've done about half a dozen RSX lights this way, and never got any moisture in there.

THe key is re-sealing and using real tight clamps to re-seal while you bake them again a little ot get the sealant to "get gooey" again to let the clamps let it all seal again.....

Zpil0t6 · 03-31-2009, 07:56 AM

i did this with one of my GTO's i made one look exactly as it did before pontiac got hold of it a" Holden manaro." and the front lens are a different shape that fit on the pontiacs backs......so i got hold of the front Lens for a few bucks and did the conversion....

But overtime i saw that some silicone had deteriorated and i had some minor Bumper work and the red paint got inside the lens.... URRGG! No moisture though.....the hole was big enough to let it breathe.....lol. So that was a pain....redoing them and cleaning the paint off the inside.

I would be more worried of the fogging... No carwashes for these conversions guys!

handwash only..

just some thing to watch IF you are gonna do this..

Skorch · 03-31-2009, 01:31 PM

Only idiots would run their Z through an auto-wash anyway

Forumite · 04-02-2009, 07:43 AM

Quote:

Originally Posted by Skorch

Only idiots would run their Z through an auto-wash anyway

Do you mean the sprayer or the one where you sit in it and the brush hits you?

I have to go to a bay in order to wash mine since I live in a condo but I do handwash it in there, really pisses off people.

Skorch · 04-03-2009, 10:28 AM

Quote:

Originally Posted by Forumite

Do you mean the sprayer or the one where you sit in it and the brush hits you?

I have to go to a bay in order to wash mine since I live in a condo but I do handwash it in there, really pisses off people.

I'm talking about the brush ones. If I go to a carwash I always get the handwash. Danny's is great for that.

03-30-2009, 05:07 PM	#10 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10326	yea that would suck if it wasn't on properly that over time it will fog up and moister gets in there. __________________ Mudders milk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The REAL official 370Z test drive thread	caj77	Nissan 370Z General Discussions	96	12-26-2011 10:37 PM
370z with GTR rims (Real)	G in ny	Nissan 370Z Photos / Spyshots / Video / Media Gallery	24	07-29-2011 03:51 AM
Anyone actually put a real set of clubs in the Z	Ram51	Nissan 370Z General Discussions	5	02-02-2009 04:51 PM
Blacked out headlight	msl82	Nissan 370Z General Discussions	6	01-02-2009 12:47 PM

03-12-2009, 11:22 PM	#1 (permalink)
stinhambo Base Member Join Date: Mar 2009 Location: Cairns, Australia Posts: 45 Drives: Kia Rio :) Rep Power: 18	My thoughts are that the LEDs should be along the bottom of the cover stretching from the bottom inside right up to the curved lip section on the outside.

03-13-2009, 07:28 PM	#5 (permalink)
nappymike Base Member Join Date: Mar 2009 Location: savannah ga Posts: 49 Drives: 2009 370Z white MT Rep Power: 18	those headlights look bad *** i really want to do this mod

03-19-2009, 12:51 AM	#6 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 542	So... Whom do I ship my headlights to that can do this mod for me? Otherwise a DIY guide would be very appreciated

03-30-2009, 08:28 AM	#9 (permalink)
Zpil0t6 Base Member Join Date: Mar 2009 Location: Florida Posts: 52 Drives: 07 Zo6,06 GTO,05Busa Rep Power: 18	I give credit to anyone that will back your lights open. Its doable but sometimes there will be a leak thereafter, moisture.

03-31-2009, 07:56 AM	#12 (permalink)
Zpil0t6 Base Member Join Date: Mar 2009 Location: Florida Posts: 52 Drives: 07 Zo6,06 GTO,05Busa Rep Power: 18	i did this with one of my GTO's i made one look exactly as it did before pontiac got hold of it a" Holden manaro." and the front lens are a different shape that fit on the pontiacs backs......so i got hold of the front Lens for a few bucks and did the conversion.... But overtime i saw that some silicone had deteriorated and i had some minor Bumper work and the red paint got inside the lens.... URRGG! No moisture though.....the hole was big enough to let it breathe.....lol. So that was a pain....redoing them and cleaning the paint off the inside. I would be more worried of the fogging... No carwashes for these conversions guys! handwash only.. just some thing to watch IF you are gonna do this..

03-31-2009, 01:31 PM	#13 (permalink)
Skorch Enthusiast Member Join Date: Feb 2009 Location: Phoenix, AZ Posts: 469 Drives: 2012 370Z Rep Power: 542	Only idiots would run their Z through an auto-wash anyway