DressUpBolts.Com Titanium Fastener Replacement Kits
 

I was just flipping through my new Sept. issue of D-Sport and saw this new product ad for DressUpBolts.Com .

It looks like they make fastener kits made of titanium and stainless. They offer them in different colors for most visible fasteners in car specific kits. The press release says they make stuff like strut tower nuts, fender washers/bolts, valve cover and I'd imagine license plate and stuff like that. I checked the site and it says they just finished kits for the 370Z. There is an engine bay kit but not much info beyond that. I'll send them a quick message and see if they can clarify here. Here is a pic of the 350/G35 kit:
http://www.dressupbolts.com/products...350&height=300

Looks like it available in blue, gold, polished, green, purple and maybe natural. Just thought I'd share.

http://www.dressupbolts.com/wp-conte...175&zc=1&q=100

http://www.dressupbolts.com/wp-conte...40_mg_9908.jpg

Blue? Don't let Tony see this!!!

sparkly...

Do they have matte black?

ooh those gold ones are money

for 200$ tho? really for a bunch of ******* bolts? I dont care if its made out of platinum - 200 for a set of bolts take quite a dolt to commit to...

Ya I'm thinking it's geared toward the guy who has quite a bit done to his car and is looking at smaller mods. I don't imagine this is anyones first mod at that price unless they are really into the detail work.

Anyway I linked this to them in an email, let see what comes with it and see if they have any pics.

Too bad I didn't notice any red. Would go really well on the Nismo models since our engine cover and interior accents are red.

I got some red aluminum washers and stainless bolts for my Nismo license frame from a local place called Hillco Fasteners but you have to piece it together yourself.

It is ridiculous! I work in the medical industry where Ti deck screws cost 350 each! Doesn't make it right, but I'm just sayin...

:iagree:

Shiny metal fasteners for a bunch of flat black engine plastics...? Okay...

just to add to the topic :tup:

Z-Enterprises Nissan 370Z Engine Compartment Stainless Steel Bolt Kit - Polished :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

Our cars are like RC cars... CF and sparkly screws and nuts sold in packs. :D

Here is the reply I got:

I told him people will want to know the price of the kit minus the airbox fasteners since a lot of people have an intake. I inquired about red and I told him to contact AK about being a vendor/Group buys. Just passing it along. If I get pics I'll post it :tiphat:

I can see it looking cool, but man thats loot for bolts...

I'm not considering it until I see red.

Even then I'm not considering it unless the group buy brings it waaaaay down

I'd be down for a Group Buy.. I like pretty engine bay stuff.. :)
My wife just ordered some of their strut bar bolts for her RX8 in Purple. they look pretty cool.

More Info:

Phelan if you want to do red aluminum washers like those fender washers shown PM me. I know a local place.

Daytona sunset orange to match my new intakes!

Im probably dreaming that that could happen.

I'll bet Mike could do it :tup:

I think that would round out my engine bay really freakin nicely. Ill PM Mike about it. I wonder if I could have him order the stainless steel set, powdercoat them, then ship them out to me...

can't hurt to ask :tup:

They are pretty small, should be easy to to do.

Thanks for the idea, Mikes been PMed

I don't think powder coating will work. It will be to thick and then you will not be able to get an allen key to fit so you can tighten the up. Anodizing is the best option. Good luck with it though :tup:

this is probably true ^

never hurts to ask though.

:iagree:

I was doing some research about anodizing stainless steel and it looks like it is really hard. most the time aluminum is the best option but some bolts in the engine bay may need to be replaced with the sane steel rather than aluminum.

I am interested in this topic now. :p

Aluminium - Pro-Bolt - Titanium, Stainless Steel, Aluminium Fasteners & Motorcycle Accessories

This place has a nice orange that might fit your needs. Gives you an idea anyways:tup:

Thanks man I'll take a look. Haha I hate seeing shiny things that I don't need to be spending my money on...

that is exactly what I told him.

yea.................... I figured that. Oh well. This may need to be one of those things to give up on and spend the dough else where. Later :tiphat:

Hey guys! Thanks for your interest in our products.

Just to clear up a few things.

The colors we offer in Titanium are the following:

Blue
Gold
Green
Purple
Polished
Black

We currently do not offer custom colors (sorry guys!)

We also have a very affordable Stainless Steel Series which shares the same head design as our current Titanium Series. Both our Stainless and Titanium Series are truly custom fasteners designed in house by us. We do not use Alum. for any of our fasteners as the finish tends to fade extremely quickly and the material is simply not as strong as Stainless or Titanium.

Also, as far as the cost goes for our Titanium Series Kits; Titanium is a very expensive material to manufacture. Each bolt goes through about 14 different steps before it becomes a finished product. We try to keep our prices as low as possible, while still providing Z enthusiasts with an extremely high quality product.

If there is interest in a GB we can offer one for our Titanium Series kits! We are looking into becoming a forum sponsor now so hopefully the mods won't take offence to our posting this here. Thanks again for the interest and we look forward to serving you in the future!

I'm down for the gold if the price us right. I think if many people jump on this then the price can be low.

Sounds good! Our Stainless Series Kits are very reasonable.

With a GB Our Titanium Series Kits will be more affordable, just looking to get an idea of how many people would be interested and then we can go ahead with it.

I'm interested in a group buy pending how the prices work out.

im def down for the titanium over stainless steel.

Sounds good.. I'll work on getting some GB pricing together for you guys.

Edit. :)

Ok guys just signed up to be a forum sponsor. I'll get the GB going tomorrow for you guys!

What kind of pricing are we looking at? ;)

Welcome, thanks for becomming a vendor. I'll be back to check out the GB.

Another product that won't match my color.

Soon!

Thanks!

Not really sure why you would want to match a color with hardware. The idea is that they do not blend in. They stand out, and make the bay look "finished". If the matched the body color they would get lost... haha

Personally I think our Polished Ti would look great on your car/color.