Access to rear fender from hatch

tjlazer · 06-23-2010, 02:50 PM

I have a dent on my rear fender. If I remove the interior hatch plastics, is there access to the fender? I want to have PDR done and want to avoid drilling into the fender liner.

Can someone who has removed the interior hatch panels comment if you can even access the fenders there?

370Z Rear Interior Removal -> Z1 Motorsports

kenchan · 06-23-2010, 03:13 PM

the tech will need to drill. not a big deal though, dont worry. drilling to gain acess is an everyday thing for PDR. depending on which side the dent is on you might want to leave the car how you have it in the pict above.

if dent is on the driver side the tech might drill from door jam side or tail lamp cavity side.
if dent is on the passenger side, tech will drill from the door jam side. he will most-likely not drill from the tail lamp cavity due to the gas filler being there.

kenchan · 06-23-2010, 03:14 PM

oh yah, after drillling the tech will plug the hole using a plug so it looks pretty much factory finish.

06-23-2010, 02:50 PM	#1 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Access to rear fender from hatch I have a dent on my rear fender. If I remove the interior hatch plastics, is there access to the fender? I want to have PDR done and want to avoid drilling into the fender liner. Can someone who has removed the interior hatch panels comment if you can even access the fenders there? 370Z Rear Interior Removal -> Z1 Motorsports __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ding on rear fender PDR?	tjlazer	Exterior & Interior	15	09-27-2010 09:52 PM
Front/Rear Bumper/Fender Molding Paint Flaw	kdo2milger	Nissan 370Z General Discussions	29	08-11-2009 02:44 PM
Rear hatch open?	gtr06	Nissan 370Z General Discussions	7	04-16-2009 06:33 PM

06-23-2010, 03:13 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	the tech will need to drill. not a big deal though, dont worry. drilling to gain acess is an everyday thing for PDR. depending on which side the dent is on you might want to leave the car how you have it in the pict above. if dent is on the driver side the tech might drill from door jam side or tail lamp cavity side. if dent is on the passenger side, tech will drill from the door jam side. he will most-likely not drill from the tail lamp cavity due to the gas filler being there.

06-23-2010, 03:14 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	oh yah, after drillling the tech will plug the hole using a plug so it looks pretty much factory finish.