Botched splash guard install from factory?

Z-WHIZ · 02-02-2010, 03:28 AM

Hey guys, I was was washing my car today and I happened to glance underneath and I noticed that the drivers side front splash guard wasn't fully bolted in underneath. I'm not sure if it came like that or became loose over time, but it appears that the screw that goes from the bottom of the guard up into the side skirt isn't fastened. It also looks like the tab that is attached to the inside of the side skirt that the screw is supposed to go through is split at the front. Is it supposed to be like this? Thanks

simota1 · 02-02-2010, 07:23 AM

any pics?

370Zsteve · 02-02-2010, 07:25 AM

How long have you had the car? Any incidents that might have caused damage? Low curbs, etc?

yubman · 02-02-2010, 08:00 AM

Aren't the splash guards a dealer installed option? If so it's not unusual for a dealer tech to improperly install something.

kenchan · 02-02-2010, 12:28 PM

yeh, my passenger side rear was not installed properly either. had to partially remove it and put a jack on it with a heatgun to re shape it. was pretty bad.

when i checked the car, it looked fine from the side, but i didnt look under the rear bumper all too well. it's fixed now but i highly recommend new buyers to thoroughly check the splash guard install the dealer did.

RedZed34 · 02-02-2010, 12:30 PM

Yeah, I noticed the same thing on my passengers side... and I know I didnt bottom out or scrap them in any way. Must be another great dealer installation

Z-WHIZ · 02-02-2010, 03:17 PM

Yeah I've never been in an accident, bottomed out or anything. The thing that has me worried is it looks like the tab on the side skirt that the splash guard connects to is cut or split in the middle. Is it supposed to be like this?

02-02-2010, 03:28 AM	#1 (permalink)
Z-WHIZ Base Member Join Date: Jun 2009 Location: Philly Posts: 115 Drives: 370 Base Rep Power: 15	Botched splash guard install from factory? Hey guys, I was was washing my car today and I happened to glance underneath and I noticed that the drivers side front splash guard wasn't fully bolted in underneath. I'm not sure if it came like that or became loose over time, but it appears that the screw that goes from the bottom of the guard up into the side skirt isn't fastened. It also looks like the tab that is attached to the inside of the side skirt that the screw is supposed to go through is split at the front. Is it supposed to be like this? Thanks

02-02-2010, 07:23 AM	#2 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 404	any pics? __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-02-2010, 07:25 AM	#3 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	How long have you had the car? Any incidents that might have caused damage? Low curbs, etc? __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory NAV Retrofit Install for Touring Models	scruffydog	Audio & Video	20	11-23-2015 06:16 AM
"Splash guard price".?	Chan Chee Hoe	Nissan 370Z General Discussions	4	10-13-2009 09:51 AM
Splash Guard Adhesive	Jaws12	Nissan 370Z General Discussions	1	07-15-2009 10:34 PM
4 piece Splash Guard	Santent	Exterior & Interior	0	07-11-2009 10:59 PM
Splashguard or not to splash guard?	Asheth	Exterior & Interior	30	06-03-2009 01:12 AM

02-02-2010, 08:00 AM	#4 (permalink)
yubman Base Member Join Date: Nov 2009 Location: usa Posts: 47 Drives: 2009 370Z Touring Rep Power: 15	Aren't the splash guards a dealer installed option? If so it's not unusual for a dealer tech to improperly install something.

02-02-2010, 12:28 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yeh, my passenger side rear was not installed properly either. had to partially remove it and put a jack on it with a heatgun to re shape it. was pretty bad. when i checked the car, it looked fine from the side, but i didnt look under the rear bumper all too well. it's fixed now but i highly recommend new buyers to thoroughly check the splash guard install the dealer did.

02-02-2010, 12:30 PM	#6 (permalink)
RedZed34 Base Member Join Date: Oct 2009 Location: Connecticut Posts: 155 Drives: 09 370Z SR Sport Pkg Rep Power: 15	Yeah, I noticed the same thing on my passengers side... and I know I didnt bottom out or scrap them in any way. Must be another great dealer installation

02-02-2010, 03:17 PM	#7 (permalink)
Z-WHIZ Base Member Join Date: Jun 2009 Location: Philly Posts: 115 Drives: 370 Base Rep Power: 15	Yeah I've never been in an accident, bottomed out or anything. The thing that has me worried is it looks like the tab on the side skirt that the splash guard connects to is cut or split in the middle. Is it supposed to be like this?