Famous Nissan Front Seat Click Problem

Trips · 02-02-2010, 08:55 PM

I have not heard any clicks yet!
187 normally and 190 after a night of white russians! lol

Jowe · 02-02-2010, 08:58 PM

Quote:

Originally Posted by TARDCORE

never heard it but I weigh bout 155 on a day with lotsa oreos and 2 tall glasses of milk. Its not a safety issue is it? I remember on clubrsx forums the replica recaros were doing something similar and in a bad vehicle accident, well most of the drivers aren't around to tell the story.

I see you have a 2010, this is a 2009 problem.

TARDCORE · 02-02-2010, 11:24 PM

oh well good thing I waited then lol

dudafunk · 04-28-2010, 12:13 PM

I took the TSB to my dealer (along with the other one about the stuck hatch release button issue - they fixed that).

It says: APPLIED VIN/DATE: Vehicles built before JN1AZ44(**)9M 410159 / 26-Jun-2009

My VIN turned out to be a little higher than this limit :-( (have a red '09 base AT)

So I guess still no solution for me yet? And I believe the 2010's do not have this issue at all.

Are there other people with production dates after June 2009 with the still issue? :-(

azn370z · 04-28-2010, 12:54 PM

I had the seat clicking in my 06 and Now the 10. It doesn't bother me. I rather have this then scratches from the dealer.

kenchan · 07-28-2012, 04:34 PM

if anyone's still scratching their heads..i was able to fix this today without a new starwasher. i just pounded the stock ones in further. no popping noise, no movement.

it was making a little bit of noise when the car was new, but lately (after 3yrs) i could sort of almost feel the seat bottom shifting just a hair so decided to fix it.

check tsb on what part is involved. basically it tells you to get 2 new starwashers which are like $2+ each and where they go.

ck service manual on how to remove the seat and the dials. you can do the work inside the car so you wont have to undo the SRS harness (no need to unplug battery which is a good thing).

total time... probably 1hr tops including vacuuming and nourishing the plastics afterwards with Prima Nero.

02-02-2010, 08:55 PM	#16 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	I have not heard any clicks yet! 187 normally and 190 after a night of white russians! lol __________________

02-02-2010, 11:24 PM	#18 (permalink)
TARDCORE Enthusiast Member Join Date: Jul 2009 Location: San Diego Posts: 410 Drives: 2010 Solid Red 370Z Rep Power: 15	oh well good thing I waited then lol __________________ XBL:EVENTYDE

04-28-2010, 12:54 PM	#20 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	I had the seat clicking in my 06 and Now the 10. It doesn't bother me. I rather have this then scratches from the dealer. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone having a problem with their driver seat moving around with aggressive driving?	kevr6	Nissan 370Z General Discussions	153	05-07-2014 08:33 PM
Seat click fix	NotmyGTR	Nissan 370Z General Discussions	25	02-22-2010 05:46 PM
Does your seat still click?	ConchZ2	Nissan 370Z General Discussions	5	07-24-2009 06:46 PM
Had my Z in for the "seat click" today...	KageZ	Nissan 370Z General Discussions	9	06-27-2009 07:49 AM
ATTN Nissan Dealers: Click Here to Learn How You Can Post 370Z Inventory HERE	AK370Z	Nissan 370Z Dealer Inventory	0	01-11-2009 05:29 PM

04-28-2010, 12:13 PM	#19 (permalink)
dudafunk Enthusiast Member Join Date: Nov 2009 Location: Long Island, NY Posts: 421 Drives: '09 370z Base Red AT Rep Power: 15	I took the TSB to my dealer (along with the other one about the stuck hatch release button issue - they fixed that). It says: APPLIED VIN/DATE: Vehicles built before JN1AZ44(**)9M 410159 / 26-Jun-2009 My VIN turned out to be a little higher than this limit :-( (have a red '09 base AT) So I guess still no solution for me yet? And I believe the 2010's do not have this issue at all. Are there other people with production dates after June 2009 with the still issue? :-(

07-28-2012, 04:34 PM	#21 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	if anyone's still scratching their heads..i was able to fix this today without a new starwasher. i just pounded the stock ones in further. no popping noise, no movement. it was making a little bit of noise when the car was new, but lately (after 3yrs) i could sort of almost feel the seat bottom shifting just a hair so decided to fix it. check tsb on what part is involved. basically it tells you to get 2 new starwashers which are like $2+ each and where they go. ck service manual on how to remove the seat and the dials. you can do the work inside the car so you wont have to undo the SRS harness (no need to unplug battery which is a good thing). total time... probably 1hr tops including vacuuming and nourishing the plastics afterwards with Prima Nero.