OEM front license plate bracket

kobnj · 05-18-2012, 08:03 AM

Did anyone have this installed on their Z? It came with my Z and my state requires a front plate. If so, does someone have a pic? I am wondering how it looks on the Z. I know holes have to be drilled for this and another option is the Stillen.

370ZilverZ · 05-18-2012, 08:15 AM

Here's mine

370ZilverZ · 05-18-2012, 08:23 AM

The holes are drilled through the black plastic where the two divits are. Word of caution. Make sure you use short screws on the top holes that hold your plate on. Otherwise screws that are too long will cut into your paint and mark it up. Look close at the picture below and you can see the damage.

kobnj · 05-18-2012, 08:33 AM

Quote:

Originally Posted by 370ZilverZ

The holes are drilled through the black plastic where the two divits are. Word of caution. Make sure you use short screws on the top holes that hold your plate on. Otherwise screws that are too long will cut into your paint and mark it up. Look close at the picture below and you can see the damage.

Thanks!! I understood your word of caution about the top holes

blackcherry20 · 05-18-2012, 02:46 PM

Great post! Havent yet instaleed my front plate (well, my husband hasnt anyway!), words of wisdom much appreciated :-)

Alexshen1 · 05-18-2012, 02:50 PM

my state requires them too, but i say fek them

TonyBPD · 05-18-2012, 03:12 PM

Quote:

Originally Posted by kobnj

Did anyone have this installed on their Z? It came with my Z and my state requires a front plate. If so, does someone have a pic? I am wondering how it looks on the Z. I know holes have to be drilled for this and another option is the Stillen.

Go for the Stillen!

kenchan · 05-18-2012, 04:52 PM

my car has the factory front plate bracket. dealer was nice enough to leave it off, but i put it on.

i made these black hard felt covers with magnet strips for shoots.

ck my albums page.

05-18-2012, 08:03 AM	#1 (permalink)
kobnj Banned Join Date: Apr 2012 Location: New Jersey Posts: 65 Drives: '12 Solid Red 370Z Rep Power: 0	OEM front license plate bracket Did anyone have this installed on their Z? It came with my Z and my state requires a front plate. If so, does someone have a pic? I am wondering how it looks on the Z. I know holes have to be drilled for this and another option is the Stillen.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Front License plate bracket	iDmac	Wanted	3	08-19-2011 05:12 PM
[WTB] OEM Front License Plate Bracket	TruKoi	Parts for sale (Private Classifieds)	3	06-21-2011 10:52 AM
ISO front license plate bracket	Somberlaine	Wanted	3	06-05-2011 09:35 PM
WTB Front License Plate bracket	cjr02	Parts for sale (Private Classifieds)	7	04-11-2011 05:37 PM
Looking for OEM Front license plate bracket	KptKIDLAT	Parts for sale (Private Classifieds)	10	06-17-2010 08:49 AM

05-18-2012, 02:46 PM	#5 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240458	Great post! Havent yet instaleed my front plate (well, my husband hasnt anyway!), words of wisdom much appreciated :-)

05-18-2012, 02:50 PM	#6 (permalink)
Alexshen1 Base Member Join Date: Apr 2010 Location: Nor Cal Posts: 154 Drives: 09 370z Rep Power: 15	my state requires them too, but i say fek them

05-18-2012, 04:52 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	my car has the factory front plate bracket. dealer was nice enough to leave it off, but i put it on. i made these black hard felt covers with magnet strips for shoots. ck my albums page.