01-02-2010, 01:45 PM
|
#4 (permalink)
|
|
Track Member
Join Date: Oct 2009
Location: San Diego, CA
Posts: 525
Drives: '10 40th Anniversary
Rep Power: 18
|
Quote:
Originally Posted by vortrex
here are some quick pics... you'll notice the driver side roof compared to the passenger side. I didn't get a shot of the driver side door panel area, but the gap is much tighter.
|
It's possible that the clips in the A pillars are not properly in there. Either that or the pillars are simple cut short. Mine are like this on both sides (exterior).. even before pick up. I looked at the other 370s and they looked relatively similar so I thought this was normal and not a huge deal. If you're really worried about the alignment then go ahead and bring it to the dealership. The gap on the outside is not the door itself but definitely the A pillars. If they are nice enough, just have them replace it with one that sits flush and provides the same gap as the one you have on the other side. There are a few clips that pops out when you pull (please be gentle so you don't break the pods that the clips hook into) and the pillar slides out in the front. Hope this helps. Best wishes.
__________________
Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R
|
|
|
Similar Threads
Threaded Mode
