Originally Posted by Kyle@STILLEN (Post 458835)

We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out.

We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia.

1) Additional cooling- We opened up the main center opening to allow for a lot more air flow.

2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car.

3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler.

4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people.

5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.

Originally Posted by Kyle@STILLEN (Post 459268)

I am pretty confident when I say that it will be ready by the end of this week. I will know more tomorrow morning when we run the new part. The mold is curing today after the changes we made and it will be ready to shoot tomorrow.

I will have a more official release soon with all the specifics and details as well as part numbers and prices for the optional upgrade pieces like the compact/hidden windshield washer reservoir, oil cooler upgrade, and more. But, for now, here is the price for the fascia. This fascia will sell for $497.00 and it does qualify for the free freight. Only $9.95 to cover insurance and handling and we pay all of the additional freight!

Originally Posted by RCZ (Post 459386)

got an image of the skirts?

Originally Posted by Vegitto-kun (Post 461562)

waiting for the price on this.

I want it

Originally Posted by Kyle@STILLEN (Post 459268)

I am pretty confident when I say that it will be ready by the end of this week. I will know more tomorrow morning when we run the new part. The mold is curing today after the changes we made and it will be ready to shoot tomorrow.

I will have a more official release soon with all the specifics and details as well as part numbers and prices for the optional upgrade pieces like the compact/hidden windshield washer reservoir, oil cooler upgrade, and more. But, for now, here is the price for the fascia. This fascia will sell for $497.00 and it does qualify for the free freight. Only $9.95 to cover insurance and handling and we pay all of the additional freight!

Originally Posted by Caravanshaka (Post 420289)

oh, and any idea how this will fit with Injen intakes that have he filters down below the headlights? It's either going to be a tight fit, or it's going to be perfect for a ram-air addition.

Originally Posted by Kyle@STILLEN (Post 420295)

I don't know that answer yet. We have found a smaller windshield washer bottle which I believe will be located in the same area as the injen filter but I'm not 100% sure about that. We wanted to relocate that windshield washer bottle so that it was out of the way of the openings and you didn't see some giant ugly white bottle with blue liquid in that vent.

Originally Posted by Shift (Post 424407)

This is kinda an off question, will Stillen be releasing any details so that a pattern can be cut for clear bra placement. Spent a boat load getting the Z's clear bra put on. Would hate to get this front end on and painted. With no way to protect it.
Thinking I'm waaaaaaaaaaaaaaay ahead of myself.

Originally Posted by Kyle@STILLEN (Post 424416)

It's interesting that you mention that. For a long time Josh and I have been trying to work with a clear bra manufacturer to see about offering clear bra as an available product for our urethane. Unfortunately we don't have a 3D scan or anything like that which we could email or release to suppliers but we're hoping to work with a company like 3M to give them a fascia and they could simply sell it to their installer's.

So basically at this time, no, we don't have an easy clear bra solution but we are working on getting that setup.

Originally Posted by Caravanshaka (Post 465860)

you should totally do a bumper give-away to celebrate the release :tup: