Originally Posted by OhioYJ (Post 3780023)

Did your temps change much after your rain guards? They have to be block some air flow. Or is the plan to remove them say for track days?

My garage is already full, so my Z sits outside (and daily driven), but I haven't really been too concerned about it. I went over the connectors with dielectric grease, even though they were weather tight connectors. Some of the exposed bolts I removed and added some "water proof" grease as anti seize. Over all the only problem I've noticed is the longer rivets were not entirely stainless, the center was regular mild steel and rusted. Ive since filled the center of the rivets with silicone to seal them, but unfortunately it caused some rust discoloration around a couple rivets.

Originally Posted by Quicksilvers (Post 3780147)

The Track Spec Motorsport hood vents are a proven modification that works and I give them a lot of credit for coming out with them and manufacturing them for our vehicles. Engine water and oil temperatures will drop about 10F-15F while street driving and at least 15F-20F on the track. You will feel the heat pouring out of them when you are at stop. Thank you Rusty for helping the Z community with the water/rain shields rep for you. :tiphat: Even with the water/rain shields installed you will see an improvement on the street or track. Also the current market price on sheet aluminum is not cheap.

Originally Posted by Rusty (Post 3741716)

Side vents installed. :D

Originally Posted by Felix 808 (Post 3781037)

Great job Rusty. Looks a lot like the Corvette hood. Am I going to have to re-cut my hood now :rolleyes:

Originally Posted by Rusty (Post 3781073)

:confused:

Originally Posted by Rusty (Post 3781089)

Thought that was your hood for a minute or so. Then I seen the leather motorcycle jacket hanging up, and the target on the garage door. :rofl2:

Originally Posted by Felix 808 (Post 3781092)

:facepalm:

Nope, my leathers were Blue, Black & White Zuki gear and I would never paint my car charcoal :p. Now days all I have are cruizers so just a Hi-way 21 Gunner Jacket hangs in the garage. Getting old sucks, but it beats the alterantive. :cool:

Nope I'm going to leave the Naca ducts, besides I almost never drive the thing. Too many vehicles not enough time or butts :facepalm:

Originally Posted by redondoaveb (Post 3864008)

Look how far back these Trackspec side vents are set.

https://www.instagram.com/p/BzRZhDSH...=1w9tdvjh2w1eo

Originally Posted by Hotrodz (Post 3864009)

They should only be 13" from the front of the hood lol.

Sent from my SM-G965U using Tapatalk

Originally Posted by redondoaveb (Post 3864011)

Maybe in Europe front means rear, kind of like they drive on the wrong side of the road. :rofl2:

Originally Posted by Hotrodz (Post 3864009)

They should only be 13" from the front of the hood lol.

Sent from my SM-G965U using Tapatalk

Originally Posted by Rusty (Post 3864029)

My center is "15, and the sides are 17".