Carbon fiber hood on 40th

Captainstevo · 04-19-2011, 05:37 AM

I've done a lot of searching and have found minimal pics of anyone doing a carbon fiber hood on a 40th anniversary. If anyone knows of any on here, please share!

I've got a lot of chips on my hood, and one is very large, and I'm guessing it's going to be expensive to fix. I'm thinking a CF hood may be a good alternative, assuming it won't chip just as badly.

What are your guys thoughts? I know that Seibon isn't 100% CF, but i've seen a few installed on here and it looks great. Just wondering how good CF will look on 40th paint.

cheshirecat · 04-19-2011, 07:07 AM

CF matches with the 40th paint better than any other color, imo. With a lot of carbon pieces, you can't even tell it's CF until you get up close- it blends that well with the 40th color.

Seibon makes decent CF hoods- just be prepared to get it clearcoated at a paint shop (it comes with a gel coat only) if you don't want it to yellow from sun exposure.

Red__Zed · 04-19-2011, 09:50 AM

I agree with chesire-- 40th + CF looks sick.

OMGWTFBBQ · 04-19-2011, 11:08 AM

If you want a prime example of how CF would look on a 40th, go check out Nitrouz's car. It looks amazing!

metz · 04-19-2011, 04:21 PM

Nitrouz's is plain weave carbon, almost all hoods are going to be 2x2 twill.
Look around in here and you will see my 40th, theres a good pic of the raw carbon in the lip against the paint color so you can see.
LeBlanc Nissan Z car show

Captainstevo · 04-19-2011, 08:17 PM

Thanks for all the feedback guys. I agree after looking at those pics that CF matches really well with the 40th!

My only hesitation now is after researching Seibon and VIS hoods, there are a lot of negative comments such as fading, fitment, etc. I would like to get a CF hood to avoid painting my current hood, but I don't want that to open up a whole new set of issues. Sounds like I may be okay if I get a Seibon and put an extra layer of clear coat on.

Captainstevo · 04-30-2011, 09:26 AM

Good news! Nissan actually covered my factory hood under warranty and repainted it for me! Got it back yesterday and it looks great! Now just waiting on my FI exhaust to get here...

04-19-2011, 05:37 AM	#1 (permalink)
Captainstevo Base Member Join Date: Mar 2010 Location: Kentucky Posts: 106 Drives: 40th, '02 IS300 Rep Power: 15	Carbon fiber hood on 40th I've done a lot of searching and have found minimal pics of anyone doing a carbon fiber hood on a 40th anniversary. If anyone knows of any on here, please share! I've got a lot of chips on my hood, and one is very large, and I'm guessing it's going to be expensive to fix. I'm thinking a CF hood may be a good alternative, assuming it won't chip just as badly. What are your guys thoughts? I know that Seibon isn't 100% CF, but i've seen a few installed on here and it looks great. Just wondering how good CF will look on 40th paint.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
seibon carbon fiber hood questions?	zuperman 370	Exterior & Interior	3	10-11-2010 01:50 PM
Carbon Fiber Hood question	drisko	Exterior & Interior	20	06-09-2010 11:44 PM
Carbon Fiber Hood + Hatch	SpawnAeroJohn	Exterior & Interior	45	10-22-2009 06:37 PM
carbon fiber hood and trunk question	thispecialk	Exterior & Interior	6	07-16-2009 10:15 PM
Carbon Fiber Hood	Jammer8	Exterior & Interior	10	06-21-2009 02:11 PM

04-19-2011, 07:07 AM	#2 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	CF matches with the 40th paint better than any other color, imo. With a lot of carbon pieces, you can't even tell it's CF until you get up close- it blends that well with the 40th color. Seibon makes decent CF hoods- just be prepared to get it clearcoated at a paint shop (it comes with a gel coat only) if you don't want it to yellow from sun exposure.

04-19-2011, 09:50 AM	#3 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	I agree with chesire-- 40th + CF looks sick.

04-19-2011, 11:08 AM	#4 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	If you want a prime example of how CF would look on a 40th, go check out Nitrouz's car. It looks amazing!

04-19-2011, 04:21 PM	#5 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 15	Nitrouz's is plain weave carbon, almost all hoods are going to be 2x2 twill. Look around in here and you will see my 40th, theres a good pic of the raw carbon in the lip against the paint color so you can see. LeBlanc Nissan Z car show

04-19-2011, 08:17 PM	#6 (permalink)
Captainstevo Base Member Join Date: Mar 2010 Location: Kentucky Posts: 106 Drives: 40th, '02 IS300 Rep Power: 15	Thanks for all the feedback guys. I agree after looking at those pics that CF matches really well with the 40th! My only hesitation now is after researching Seibon and VIS hoods, there are a lot of negative comments such as fading, fitment, etc. I would like to get a CF hood to avoid painting my current hood, but I don't want that to open up a whole new set of issues. Sounds like I may be okay if I get a Seibon and put an extra layer of clear coat on.

04-30-2011, 09:26 AM	#7 (permalink)
Captainstevo Base Member Join Date: Mar 2010 Location: Kentucky Posts: 106 Drives: 40th, '02 IS300 Rep Power: 15	Good news! Nissan actually covered my factory hood under warranty and repainted it for me! Got it back yesterday and it looks great! Now just waiting on my FI exhaust to get here...