Sigh.....silly iPad

MR.nismo

If it is just "the surface" you should be able to touch up, a bit of polish and done deal. If it is "deep" or heavily scratched then is going to be harder to make it look as good as new.
And I understand and feel your pain. I'm very careful with my things as well and I love everything in stock form. If wanted to do mild or wild transformations I would have bought an used base model in order to change/replaced just about anything.

__________________
Sarcasm and Orgasm are about the same thing. One is good....the other is better.

OTW Z-Boy

Couple of suggestions...

There has to be a paint code out there for the interior trim. There are a couple of spray paint manufacturers that work off these codes and sell cans direct to the public. Get an can of the silver and a can of satin clear pull the shift housing off sand down that chip rinse with h20 and pressure air dry. Spray a super light dusting coat of the silver in a ventilated area free of dust and particles in the air wait 15 minutes then repeat... Then repeat again.... Then repeat again... Then if you're not to high on fumes go ahead and spray a light coat of clear then repeat a couple more times.

Or do what cooltoy said and buy an awesome cf bezel for the shifter!!!

__________________
2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI | SPL F/R Camber Arms | HKS Hypermax IV | JDM Rear Fog Light |GT-R Push Start Button | Z1 2 Piece D/S | Illuminated Kicks | Tommykaira | Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 | Fast Intentions RHFC TDX CBE 12" CF | EcuTek