I love carbon signal but they never reply pms or instagram

I know they are working on the final setup and getting it ready as soon as possible. Also the different timezone makes the delay a bit longer. Cant wait to see it completed.

Yeah it's almost 1am in Dubai now.

Also bear in mind it's like Easter in Dubai here (Public Holidays)

It was put on hold for few weeks but we did post an update on first protytype on our FB page :)

http://i1124.photobucket.com/albums/...pskupgj432.jpg

http://i1124.photobucket.com/albums/...pszd0hapcj.jpg

Not a final one as there will be some revisions to the design in the coming days, one in the pic is with the joystick and airlift controller (not properly installed), Normal production one will have just the joystick.

We will offer an option of integrating any other air setup module or boost controller in the console as well. Hopefully design will be finalized by next week.

:tup:

We will look into at later stage as module can display anything with HDMI input which is not there we will see what can be done via RCA or AV port but for now it will be offered as above pic.


Im sorry but we do reply to pms on forum & FB along with emails and whatapps messages at earliest, we are looking at 15-25 messages (more on weekends) on each platform on daily basis so sometime we can miss here and there at times because of time difference and weekends on different days. I tried to dig in pms but couldn't find your message back till beginning of the year

Instagram it says clearly for ways to contact either email or whatsapp, phone call, cant send DMs to everyone and most of the time we cant see all comments for replying because only limited numbers are visible

I tried to dig in the pms here couldn't find from you from jan till now, please send it again and someone will tke care of it.

Looks way better than my sketches. Can the CS logo be centered somewhere?

Also, I believe the top part of the radio bezel is shaped differently for Bose and non-Bose (Base) trims.

looks great

It will be done first for Bose then altered for base model.

In a normal just joystick one logo and joystick are in middle.

Final design will have some more changes

Here's some ideas for a lower profile rotary encoder knob. See if this helps with the overall design especially center mounted. You may have to use a spacer to offset the rotary encoder or source a different one:
http://www.adafruit.com/images/970x7...G7UI6cXMfT.jpg
http://www.robot-italy.com/media/cat.../0/2055-02.jpg

Unfortunately, it'll be difficult to make space for a boost control module unless you put the rotary encoder on the extreme sides. Heck, maybe it can be an option with detachable face plates.

Wait for final design:tup:

We are using same rotatory knob its very nice quality and also feel (aluminium), as manage to install airlift and knob along with a decal plate so there is enough space. We did airlift as we are agents for it no so can offer else there will be knob just in middle and also without any holes so customer can install it where ever they like (syncro rev space in autos or between seat heaters) and use this space for boost turbo timer etc.

Ha... yea I have 3 blank switch spots. I can easily mount a couple of switches and joy stick in that area. It's fine as long as I don't spill my coffee on it from taking hard turns, which is near impossible in between shifts. :driving:

Heck, I might cut into my factory radio bezel and fit something there since it's easier to reach.

sub'd

you can opt for black one make holes and install anything you like there :)

When will this item be available for purchase?

In for updates.

Once we post final one running then a GB will be started.

At the shop update as of today is molding process of piece we posted last week is done, first product in Cabon Fiber is done under clear coat, we plan to install and hook it up this week with pictures and a video.

subbed for finished project

carbon prototype is ready getting installed this week:happydance:

Making few more samples, with and without airlift controller in painted, vinyl material same as stock stitched in the middle and in alcantara

http://www.the370z.com/attachment.ph...1&d=1438748025

CS, will you be able to produce a double din face plate to match the CF weave?

We can see all depends on if time allows

OH...... SNAP :excited:

Would you be able to make an area to mount Tein's EDFC active below the screen?


Sent from my iPhone using Tapatalk

Very cool! Have you guys ever played with the factory screen on the G37 for a gauge system?

Yeah can be done no issues, we will have a blank one can be customized as per customer requirements.

Subbed. The group buy mentions OBDII reader with cable, is that refering to zada tech?

Zada Tech has their own. AFAIK, they're working on PID output for our cars. Hopefully we can get some useful stuff. Most important for me is oil temperature so I can use it to switch on my oil cooler fan. Compared to my external sensor and gauge, it is off by 15F!

On whole package

:tup:

Impressive
 

Looks great! I'm interested in a panel that replaces the cubby and fits a 7" tablet screen. I don't need switches or a rotary encoder. I prefer to have maximum screen area.

When you have these ready for sale I will buy one! Keep up the great work.

@CarbonSignal, have you guys started sourcing various switches that match the decor, or can you fab something up?

With the SPAL fan, I splice the relay fan output to connect an LED to indicate the fan is getting power. The relay switch input I believe is active low, which normally connects to a temperature sender. I plan to connect it to a switch for manual operation, but will also have the Zada Tech module control it as well. It's an idea I shared with Matin. It would be nice to have a separate backlight for the switches so I a can see it at night.

[EDIT] I may have missed it or it was briefly mentioned. Any plans for rear-view camera input and sense?

All installed some low qaulity pics but just to give an idea and no there is no person inside the screen :)


http://www.the370z.com/attachment.ph...1&d=1439352186

http://www.the370z.com/attachment.ph...1&d=1439352186

Prices for GB will be up soon if enough people will go ahead with it else a normal purchase as with all of our parts.

No plans for any switches or anything, console as in pic will be with joystick, did for airlift also but anything else will be a custom order discussed at ordering time, drilling for switches is easy. For fans which you saying is easy via installing any toggle switch.

Backlight we did mention have a wire hooked to headlights so when lights are on screen will be dimmed a bit as in any new car.

Rear camera yes there is an input.

Yeah possible but cant commit if it will hold any other 7" tablet as we made to hold the screen we have it but can be tried for sure.

looking forward to see the base radio setup. CF is nice, but i have the reflection of the display. Might go with fiberglass.

omg.. so much yes!

beautiful :yum:

Want.

@CarbonSignal, do you have access to a 3D printer? I wonder you print a nice flat rectangular frame for the display that you can mold around with. Maybe it can help close the gaps and make it look nicer when you mount the display panel.

I searched around for a trim or bezel... no luck. Another option is to get some ABS plastic and have a machine cut it.

There isint any gap we can whole thing yesterday its all good, will be posting some pictures and video.

so nice but what about people with aftermarket radios?

What about it, if cubby hole is empty then its ok install there