Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exhaust/Intake (http://www.the370z.com/exhaust-intake/)
-   -   Custom ported and CNC throttle bodies, upper and lower manifolds (http://www.the370z.com/exhaust-intake/92296-custom-ported-cnc-throttle-bodies-upper-lower-manifolds.html)

SS_Firehawk 11-01-2017 01:38 PM

Quote:

Originally Posted by Spartan 1771 (Post 3704339)
I was dynoed on a Dyno-Dynamics. Funny thing is, everything I have heard and read says their numbers are usually lower then a Dynojet.

There's so much variation that it can read +/- 10%. You can change load variables to simulate speed, aerodynamics, roads, grades,elevation, temps, etc. It makes for a great tuning tool, but it's best to use the same dyno, especially before and after mods; when it's not a dynojet. I've seen some dynos where they have basic bolt ons and it shows 350whp. Your 344/276 is most likely in that ball park on a dynojet. It just depends on temps, elevation, and humidity.

Jimbo370 11-22-2017 08:21 PM

upper manifold porting
 
Getting ready to change sparkplugs at 95k so I thought this would be a good time to swap out. Do you have any ready to send. Does it still cost $330 thru paypal? THANKS:tiphat:

synolimit 11-23-2017 09:10 AM

Quote:

Originally Posted by Jimbo370 (Post 3709332)
Getting ready to change sparkplugs at 95k so I thought this would be a good time to swap out. Do you have any ready to send. Does it still cost $330 thru paypal? THANKS:tiphat:

Yes it does but none ready for shipping. I port as I go.

synolimit 12-11-2017 03:14 AM

I can also be reached on Facebook at Scott Thomas with a pic of my Z on the track.

BlKsUbYkId 01-11-2018 07:20 PM

PM'ed

totbishop 05-11-2018 02:23 PM

PM'd. Anyone know if these parts are still offered?

synolimit 05-11-2018 03:58 PM

Yes they are

SG4247 06-22-2018 08:21 PM

Hey Scott,

Your inbox is full, attempting to send you a PM.

synolimit 06-23-2018 12:41 AM

Yeah its full, i posted a message to you.

Morfiy 06-23-2018 06:14 PM

Inbox is full, so I'll ask here..

Is it practically possible to send you the cores first?

synolimit 06-23-2018 11:07 PM

Quote:

Originally Posted by Morfiy (Post 3766763)
Inbox is full, so I'll ask here..

Is it practically possible to send you the cores first?

Yes the first page discusses all this.

Jsolo 08-12-2018 11:27 AM

Anyone try this method yet?

https://www.myg37.com/forums/d-i-y-i...-learning.html

SG4247 08-12-2018 11:33 AM

I just installed a pair of Scott’s TBs.

Very nice work done on my cores, good turn around time too.

Car starts and idles perfect. No idle learning required, and my car has many mods!

SG4247 08-12-2018 12:01 PM

4 Attachment(s)
I did have to port the intake opening for these throttle bodies.

The exit on the TB measured 2.520”

The inlet on the intake measured 2.480”. You can see a .020” high step all the way around the inlet in the second pic, that I had to remove.

bmstitt 10-18-2018 10:08 AM

Trying to return my cores, but having trouble connecting with Scott here of FB. Any recommendations?

jpowersjr22 01-13-2019 09:55 PM

Any luck?

Is Scott still making these?

g37xtasy 05-14-2019 11:57 PM

Would also like to know. His inbox has seemingly been full for months.
I am interested in buying.

robbieZ208 06-25-2021 09:13 AM

After cleaning the z throttle bodies can i leave it as is till the morning after so im able to have a cool enough temp for the relearn procedure or do i have to do it within the same day?

Sent from my LM-Q730 using Tapatalk


All times are GMT -5. The time now is 08:52 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2