Nissan 370Z Forum - Z1 Motorsports: VQ37VHR 400HP Package

Nissan 370Z Forum (http://www.the370z.com/)

- Exhaust/Intake (http://www.the370z.com/exhaust-intake/)

- - Z1 Motorsports: VQ37VHR 400HP Package (http://www.the370z.com/exhaust-intake/84201-z1-motorsports-vq37vhr-400hp-package.html)

Z1 Motorsports: VQ37VHR 400HP Package

VQ37VHR 400HP Package

http://www.z1motorsports.com/g37_370...2-306a02c0.jpg

The Z1 Motorsports VQ37VHR 400HP Package includes tested and proven components necessary to maximize the output of your naturally aspirated 370Z or G37.

After a over a year of development and extensive dyno testing on multiple cars, we have released an intake manifold modification that complements our mid length exhaust header design which produces more peak power (while maintaining power under the curve) than any other products on the market we've tested including more expensive long tube headers and competitors intake manifold upgrades.

Nissan advertises 332 horsepower (350 for the Nismo) as the output of the VQ37VHR engine found in the 370Z & G37. Auto manufacturers rate horsepower at the flywheel. From our testing, new stock 370Zs produce around 280 rear wheel horsepower on a DynoJet, which is consistent with Nissan's claims assuming 15% drivetrain loss. Given this drivetrain loss, 340 rear wheel horsepower equates to the engine producing 400 horsepower.

In conjunction with a Stillen Gen 3 Intake and a quality high flowing exhaust system the Z1 VQ37VHR 400HP Package can produce 340+ rear wheel horsepower on a DynoJet on 93 octane fuel when properly tuned with Uprev Engine Management. We have not included the intake, exhaust, or engine management systems in this package because many people have already purchased these items. We recommend installation and tuning through Z1 Motorsports.

This package includes the following components:

Z1 Motorsports Performance Exhaust Headers
Z1 Motorsports 2.5" Test Pipes
Metal Exhaust Gaskets (Header to Test Pipe)
Modified Upper Intake Manifold (core charge applies)

Click Here to Order!

awesome info! does this require the stillen g3 or can other intakes be used?

In conjunction with a Stillen Gen 3 Intake

Jon,

Cost.. intake manifold modification

Quote:

Originally Posted by cdoxp800 (Post 2634022)

Jon,

Cost.. intake manifold modification

Same, I dont need headers or test pipes, but im interested in the IM

John, if I purchased this kit can I use my res FI test pipes or do I have to use your test pipes??

Quote:

Originally Posted by Wonka2581 (Post 2634090)

John, if I purchased this kit can I use my res FI test pipes or do I have to use your test pipes??

You must use the DE style test pipes.

Quote:

Originally Posted by LostSol (Post 2634084)

Same, I dont need headers or test pipes, but im interested in the IM

PM sent!

All parts are in stock!

NA power is in stock and ready to ship!

400hp package with a 100 shot of Nitrous!

http://i991.photobucket.com/albums/a...ps83d60b0b.jpg
The hump was on the first pull do to bottle pressure. :driving:

John,

I am interested in this setup. Send me a price for the system. Do you offer installing as well? If so, send me pricing for system and install. How long will you need the car.

I will drive to you for system and install.

Thanks.

Quote:

Originally Posted by tiger123 (Post 2735035)

Yes sir we do perform installs and tuning of the vehicle. Please email me at info@Z1motorsports.com for a full quote.

Quote:

Originally Posted by John@Z1 (Post 2744885)

Yes sir we do perform installs and tuning of the vehicle. Please email me at info@Z1motorsports.com for a full quote.

John, Thanks but I decided to go in a different direction.

Going with Berk HFC's to match my Berk CBE.

Thanks again.

i have GTM Resonated Test Pipes, would this work?

Quote:

Originally Posted by MrJdmNismo (Post 2748785)

i have GTM Resonated Test Pipes, would this work?

Only if it's the DE model.

All parts are in stock!

Will you guys make this yo be compatible with other types of test pipes for our type of engine?

How about 4th of July sale for intake manifold?

The absolute best NA power package available!

Thanks for all the order guys and the positive feedback. 400hp package in stock.

Hey John is this a special pricing deal or just order through your website? If there is special pricing pm me.

Thanks,

Nef

Quote:

Originally Posted by John@Z1 (Post 3229605)

In stock!

Whats the install price Jon, I'm local and very interested. I just had my Top Speed test pipes installed there a few months ago on my Nismo, would these work with this setup and is the Gen 3 absolutely needed? I have K&N filters and your Silicone Post MAF Intake Hoses already and pretty satisfied with them.

I have all those parts already, Ex the headers , Do these fit a G37 X sedan?

They will fit the X sedan.

Quote:

Originally Posted by John@Z1 (Post 3244866)

They will fit the X sedan.

If I can not find gears I MIGHT do these. Wanna get into the 12's. :excited:

I don't think just by putting headers on you'll gain .5 seconds in the 1/4

I have been debating on getting these..
I would like to find someone who has a dyno with these headers but I have yet to see anything..
I mean dropping close to 2k for headers HFC and install is it really worth the cost..
that's where I am stuck at

Quote:

Originally Posted by ANMVQ (Post 3245008)

If I can not find gears I MIGHT do these. Wanna get into the 12's. :excited: