:iagree:

They are 1.75 lbs. Outer tubing is 4"x4", inner tubing is 3", same taper as the GTR tips, just 1" smaller OD. 6" measured from tip to tail. These pictured are made to clamp onto 2.5" tubing, so the clamp tube is 2-5/8" OD.

Those look so crazy. I mean seriously it looks like a jet nozzle lol.

If our cars had a single center exit exhaust, there would be no question I would get this. :rofl2:

Ready for shipping wearing a smoke brushed finish.

We'll have pics of the GTR tips set in black chrome in the next two weeks.


http://i54.photobucket.com/albums/g9...O/GOPR0186.jpg

http://i54.photobucket.com/albums/g9...O/GOPR0188.jpg

http://i54.photobucket.com/albums/g9.../GOPR0191a.jpg


Welcome to Fringe XVO

very nice but i dont i understand what takes so long to get pics of such a simple to install mod

@ zsizzle: There are several factors involved, one being that the initial installation fell through when the owner of the car decided to sell it. We got a lot of feedback through that experience and decided to redesign the tips. You are seeing some of this now...we may use this tip we designed for the Raptor, just slightly modified. Many of you have chimed in on the tip that was originally put forth, and so we're looking for your responses again.

Will the GT-R version still have quad tips, or will you just have 2 larger ones instead?

@ Chris: A GTR set of Afterburner tips consists of 4 tips (5" OD tapering to just over 4") and 4 Accuseal Torca exhaust clamps...or the stock tip clamps can be re-used.

Weight correction: These last tips are 1lb12oz (1-3/4lbs) each. Shipped weight of package of two tips with two clamps is just under 6 lbs.

Do you only do the tips, or is there something more you can do i.e. making a combination pipe that brings both together for a Single Exit exhaust for a Z?

I am personally capable of just about anything and am very practiced with thinwall tubing, but I am equipment limited.

All 3 versions of the tips that have been made are pictured here, except for the new production model GTR tips.


http://i54.photobucket.com/albums/g9...VO/Fringe1.jpg

I really like the top one. :tup:

I really like the top one aswell.. The smoke brushed finish looks great. What are the exact dimensions of this tips outside diameter and diameter of the tip where it necks down at the exit?

We are glad to hear it. Every tip pictured since post 84 is the same two tips. The "orange" tip looks that way because of sunlight from a sunset that was shining into the room. I love it.

We are gonna post in the general forum that we are looking for someone in the Austin area to help us hurry up and get this design finalized. If you know anyone who might be interested, send them our way. There's a deep discount in it for whoever helps us out. One requirement: They must have an aftermarket exhaust with removable tips on 60mm pipes.

Dimensions are:
Outer tubing starts at 4" OD and tapers down to 3.125" OD
Inner tubing is 3" OD
All tubing is .0625" wall thickness
Tips clamp onto 2.5" exhaust system tubing