Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exhaust/Intake (http://www.the370z.com/exhaust-intake/)
-   -   AAM Comp. Exhaust Sale: 2.5" and 3'' True Dual Exhaust Exhaust, HFC and Test Pipes! (http://www.the370z.com/exhaust-intake/12560-aam-comp-exhaust-sale-2-5-3-true-dual-exhaust-exhaust-hfc-test-pipes.html)

Rob@Altered 12-22-2009 10:08 AM

AAM Comp. Exhaust Sale: 2.5" and 3'' True Dual Exhaust Exhaust, HFC and Test Pipes!
 
AAM Competition 2.5" Tru Dual Exhaust
MSRP: $1,295
Special Until Feb. 28th: $999.99


Altered Atmosphere Motorsports is proud to announce our AAM Comp 2.5" True Dual Exhaust System for the Nissan 370Z. Maintaining a refined yet aggressive sound with sleek appearance this true dual design provides the perfect gain in power and sound and features dual 2.5 inch mandrel bent, Aircraft Grade SUS304 stainless-steel. This is a true "cat-back" exhaust system as it replaces the restrictive factory y-pipe, mid-pipe, and rear exhaust muffler section. Average horsepower gains with this exhaust system is 12-16hp and up to 10lbs per sq ft. of torque!


http://farm4.static.flickr.com/3505/...7fa74980_o.jpg

http://i221.photobucket.com/albums/d...h_MVI_0965.jpg


AAM Competition 3" Tru Dual Exhaust
MSRP: $1,495
Special Until Feb. 28th: $1,196.99


Introducing the brand new AAM Competition 3" Tru Dual Exhaust. Conceived in excellence, and built for performance, this full 3" exhaust will perfectly fit both N/A and F/I applications. Peak power is produced in the High RPM range from this exhaust on your N/A car, but the full potential of this exhaust will be truly unleashed on your turbocharged 370Z. This 3" Tru Dual Exhaust played a crucial part to our 500WHP 370Z!

*Shown with optional titanium tips*
http://farm3.static.flickr.com/2538/...3256dbea_b.jpg


AAM Competition High Flow Cats
MSRP: $599.99
Special Until Feb 28th: $510.00


Utilizing a similar design to the highly efficient 350Z high flow catalysts, the new AAM Competiton High Flow Cats for 370Z fitment are now available.

Constructed out of robust 2.5” mandrel bent 16-gauge T-304 stainless steel to ensure the highest quality and reliability, the AAM Comp 2.5" High Flow Cats replace your vehicles restrictive factory catalytic converter with a new technology in high-flow converter element. The new metallic converter technology flows 40% more than most other cats currently on the market. This allows a significant gain in flow which makes the AAM Comp 2.5" High Flow Cats a perfect fit for both naturally aspirated and supercharged/turbocharged Nissan 370Z cars.

http://farm4.static.flickr.com/3485/...2a8b0a02_o.jpg


AAM Competition Test Pipes
MSRP: $279.99
Special Until Feb. 28th: $239.99


The highly anticipated AAM Spec 2.5" Test Pipes for the Nissan 370Z and Infiniti G37 are finally here! After servicing and installing several of our competitors designs we decided to make a higher-quality test pipe that meets the demanding reliabilty expectations of our customers.

In addition to having poor fittment, many of the test-pipes on the market are constructed of thinner, lower grade stainless tubing. Not only are these units highly succeptable to fatigue and cracking on near stock 370Z's and G37's, some customers with supercharged and turbocharged 370Z's have torn apart the weld joints of these inferior test-pipes. Made out of 2.5" mandrel bent 16-gauge 304 stainless steel to ensure the hightest reliability and quality, the AAM Spec 2.5" Test Pipes replace your vehicles restrictive units to allow the higest possible exhaust flow.

Dyno testing has shown 8 to 10 RWHP gains on a near stock Nissan 370Z and 20+hp gains on a turbocharged Nissan 370Z! The AAM Spec 2.5" Test Pipes are for off-road use only and are a direct bolt-on replacement of the factory units.

http://farm3.static.flickr.com/2657/...4ef4756fe3.jpg

Rob@Altered 12-24-2009 12:03 PM

Bump!

Rob@Altered 12-28-2009 08:21 AM

After Christmas Bump!

Rob@Altered 12-29-2009 04:37 PM

Bump!

Rob@Altered 12-31-2009 02:36 PM

Bump!

LiquidZ 01-01-2010 09:48 PM

Hey Rob and AAM, your exhaust components look great!

Rob@Altered 01-04-2010 10:02 AM

Thank you!

Rob@Altered 01-06-2010 08:11 AM

Bump!

Rob@Altered 01-07-2010 04:51 PM

All PM's replied.

Rob@Altered 01-11-2010 05:02 PM

Bump.

Rob@Altered 01-13-2010 08:28 AM

Morning Bump.

Rob@Altered 01-15-2010 04:19 PM

Bump.

Rob@Altered 01-18-2010 04:58 PM

Bump.

SOLISIMO 01-18-2010 05:08 PM

Rob do you think the 3" dual would be fine with Long Tubes and a tune?

Rob@Altered 01-19-2010 09:00 AM

Could you elaborate a little bit? By "Long Tubes", do you mean the headers? Are you talking about power/performance, or fitment?


All times are GMT -5. The time now is 05:18 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2