|
Before buying any parts, I'd try snugging everything up. As mentioned above there is the pipe nipple that holds the adapter plate on. The fittings may need to be loosened,
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-25-2014, 01:26 PM
|
#23 (permalink) |
|
Premium Member
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198   |
Before buying any parts, I'd try snugging everything up. As mentioned above there is the pipe nipple that holds the adapter plate on. The fittings may need to be loosened, cleaned, and properly tightened. They're pickier than most people realize, especially on the initial install. If over-tightened, the ferrule will not seal properly. Make sure everything is tightened to spec - too tight can be as bad as too loose. If that doesn't fix the leak, then start worrying about replacing parts.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| check engine light.....valve covers leaking? | 7speed | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 10 | 11-03-2013 05:02 PM |
| Need replace the valve cover. Help needed. | chuan.1992 | Engine & Drivetrain | 8 | 03-22-2013 11:06 AM |
| Radiator Leaking | hazzazi | Mid-Atlantic Region | 11 | 10-11-2011 12:31 PM |
| Valve cover breathers? | bigrob126 | Intake/Exhaust | 5 | 06-24-2011 04:25 PM |
16Likes
Threaded Mode
