Nissan 370Z Forum
Page 21 of 37 « First 111920 21 222331 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts (http://www.the370z.com/engine-drivetrain/8396-nst-nonstoptuning-370z-vq37hr-pulley-kit-review-w-dyno-charts.html)

axmea? 08-20-2013 05:40 PM
^^ Thanks for the update.

Zythaxus 08-20-2013 05:52 PM
Craaap I really missed this? Damnit

Sent from my EVO using Tapatalk 2

brucelidat 08-20-2013 06:30 PM
i also didn't know about the group buy until just a few days ago.

NickD 08-21-2013 09:21 AM
Quote:
Originally Posted by brucelidat (Post 2450760)
Did anyone post any independent dynos? I've gone through a whole lot of the pages in this thread and haven't seen any. Also, I think I read someone mention improved mpg, anyone have any comments on this? I am losing some MPG with my 4.08 gears and thought the pulleys might be a good way to get some of that back. Any small hp bump would be welcome, but i doubt I would feel it. Will the engine really be much more responsive if I already have the 4.08 gears?
This is my understanding so I hope it helps.

1. Pulleys are not intended to MAKE power but rather free up EXISTING power loss
2. Regardless of 4.08 gears, pulleys free up power through the entire band, not just low end.

All - Feel free to correct me if i'm wrong

Chuck33079 08-21-2013 09:26 AM
Quote:
Originally Posted by NickD (Post 2454770)
This is my understanding so I hope it helps.

1. Pulleys are not intended to MAKE power but rather free up EXISTING power loss
2. Regardless of 4.08 gears, pulleys free up power through the entire band, not just low end.

All - Feel free to correct me if i'm wrong
Nope, you're spot on. You may feel more of a difference on the low end, since you've got to get the pullies spinning. At higher rpm you may not feel as much of a difference since the pulley is already spinning more quickly. Pullies aren't really as much of a "HP mod" as they are a "throttle response" mod.

Meulen 08-21-2013 09:36 AM
there was a group buy? can we still get in?

shipped to 60446?

zilverbullet 08-21-2013 09:47 AM
You'd have to PM NST but I think it might be late.

Mannn...where were you all when we were struggling to find 20 buy-ins :D

Meulen 08-21-2013 10:02 AM
Quote:
Originally Posted by zilverbullet (Post 2454803)
You'd have to PM NST but I think it might be late.

Mannn...where were you all when we were struggling to find 20 buy-ins :D
probably not on the site yet....just joined and just got my Z! :)

FPenvy 08-21-2013 10:06 AM
group buy? whats the price?

axmea? 08-21-2013 10:24 AM
Quote:
Originally Posted by FPenvy (Post 2454844)
group buy? whats the price?
FPenvy -- 20% off ---- $198 for both choice of colors extra for the belts. You had the snooze button on.....

FPenvy 08-21-2013 10:26 AM
Quote:
Originally Posted by axmea? (Post 2454871)
FPenvy -- 20% off ---- $198 for both choice of colors extra for the belts. You had the snooze button on.....
i just came across this lol my bad.

NonStopTuning 08-21-2013 12:18 PM
Thank you for all the enthusiasm and support everyone. We had the GB open for several weeks, and even extended beyond the deadline a few times. We can't extend the GB price and options at this time. You can still order from our website 24/7 at your leisure.

Thanks again everyone!

NickD 08-21-2013 01:10 PM
With all the people looking to get in on the GB maybe NST will have another GB if there is enough interest. Looks like there are already about 5 people lol

gbrettin 08-21-2013 02:59 PM
Get the group buy going around November... So I can buy myself a christmas present.

shotgungho 08-22-2013 10:57 AM
can't wait can't wait can't waaaait!!! seriously...need some modding in my life like asap :D

Shadezz 08-27-2013 01:51 PM
Teaser pics of the production process would be cool!!

NickD 08-27-2013 03:22 PM
+1

NonStopTuning 08-28-2013 02:34 PM
We may do a CR-Lite (OEM size crank pulley) for the supercharged guys soon!

Any interest??


MIKE @ NST

SS_Firehawk 08-28-2013 03:54 PM
This guy!!!

NonStopTuning 08-30-2013 04:16 PM
https://sphotos-a-dfw.xx.fbcdn.net/h...52077924_n.jpg

Another quick little update. Say hello to the new 2013 NST girl, Leila :tup:


MIKE @ NST

chuckie311 08-30-2013 05:54 PM
if anyone who missed out on the group buy wants to get a set of black pulleys with belt PM me..ill be selling mine once they come and for 200 shipped..

NickD 09-03-2013 07:42 AM
Quote:
Originally Posted by NonStopTuning (Post 2468240)
https://sphotos-a-dfw.xx.fbcdn.net/h...52077924_n.jpg

Another quick little update. Say hello to the new 2013 NST girl, Leila :tup:


MIKE @ NST
I'd like a picture of her holding my pulleys :)

ka24king 09-03-2013 09:43 AM
Cheezus I'm dying to gets nd install these !!!

Rangerz 09-03-2013 06:38 PM
Mike,

Any update on when you can start shipping the group buy kits.

Thanks

NickD 09-04-2013 08:18 AM
Quote:
Originally Posted by NickD (Post 2471361)
I'd like a picture of her holding my pulleys :)
And I mean that in the most automotive way possible.

NonStopTuning 09-04-2013 02:23 PM
Quote:
Originally Posted by NickD (Post 2472623)
And I mean that in the most automotive way possible.
LOL :icon18:


I'll have another update for you guys over the next few days. Please stay tuned.


Thanks again!


MIKE @ NST

NonStopTuning 09-05-2013 04:31 PM
I've had a few guys here ask if they can add NST shirts to their orders and save on shipping fees.

YES! Definitely. If interested, please email us or PM and I'll be happy to contact you.

MENS STUFF: MENS STUFF: MENS STUFF:
Small, Medium, Large, XLarge, XXLarge $18.00 each

http://sphotos-b-pao.xx.fbcdn.net/hp...48405387_n.jpg

http://sphotos-b-pao.xx.fbcdn.net/hp...75716407_n.jpg

http://sphotos-b-pao.xx.fbcdn.net/hp...54559594_n.jpg

WOMENS STUFF WOMENS STUFF WOMENS STUFF
Small, Medium, Large, XLarge $18.00 each

http://sphotos-b-pao.xx.fbcdn.net/hp...45093491_n.jpg

http://sphotos-a-pao.xx.fbcdn.net/hp...52077924_n.jpg

http://sphotos-b-pao.xx.fbcdn.net/hp...22231423_n.jpg


To see all the merchandise we offer:
NonStopTuning Collectibles - Shirts, Hats, Decals


Thanks all!


MIKE @ NST

ka24king 09-05-2013 04:34 PM
i forgot to specify i need mediums :tup:

NonStopTuning 09-05-2013 04:36 PM
Quote:
Originally Posted by ka24king (Post 2474620)
i forgot to specify i need mediums :tup:
:tup::tup:

+1 of each design for your girlfriend? ;)


MIKE @ NST

ka24king 09-05-2013 04:40 PM
she will end up wearing mine anyways lol

thanks again for helping me out !

Quote:
Originally Posted by NonStopTuning (Post 2474625)
:tup::tup:

+1 of each design for your girlfriend? ;)


MIKE @ NST

mag_black 09-05-2013 05:19 PM
I probably shouldn't have opened this thread at work. It was worth it though!

NonStopTuning 09-06-2013 12:13 AM
Quote:
Originally Posted by mag_black (Post 2474653)
I probably shouldn't have opened this thread at work. It was worth it though!
What's not to like? :happydance:


MIKE @ NST

gbrettin 09-06-2013 10:45 AM
I opened this at work too... I don't regret it.

NonStopTuning 09-06-2013 03:34 PM
:iagree:

I open this thread at work all the time!


MIKE @ NST

axmea? 09-06-2013 04:30 PM
Quote:
Originally Posted by mag_black (Post 2474653)
I probably shouldn't have opened this thread at work. It was worth it though!
I have a dedicated lap top for fun and nsfw items.

Rangerz 09-06-2013 09:17 PM
Any news Mike on an est ship date for the GB?

Thanks

NickD 09-10-2013 11:27 AM
Can we please get an update on how production is going and an estimated ship date?

NonStopTuning 09-10-2013 04:25 PM
UPDATE: Alternator Pulleys are done, still waiting for crank pulleys to come off the machines. All pulleys will then be anodized and engraved.

I hope to have another update for you guys mid to late next week.

Thanks again everyone!


MIKE @ NST

NickD 09-11-2013 09:15 AM
Quote:
Originally Posted by NonStopTuning (Post 2453934)
Here's a little update for the GB members!

Alternator pulleys are off the machines, crank pulleys are in the works. All pulleys will go through the anodizing process after this, and should be ready within the next couple weeks.

:tup::tup:

NowStayTuned!


MIKE @ NST
Mike...that's not an update considering you told us that on 8/20 (see quote above). I'm not getting the warm and fuzzy feeling i should be getting by now.

chuckie311 09-11-2013 11:26 AM
NikD... dont forget they got a late start on things from extending the group by.. they said it would take 40-50 days to complete everything...so look's like they are on track or close to it..


All times are GMT -5. The time now is 01:07 AM.
Page 21 of 37 « First 111920 21 222331 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2