Nissan 370Z Forum - What is your oil pressure after oil cooler install?

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - What is your oil pressure after oil cooler install? (http://www.the370z.com/engine-drivetrain/73686-what-your-oil-pressure-after-oil-cooler-install.html)

Plasmite

05-04-2014 09:12 AM

Quote:

Originally Posted by roplusbee (Post 2788891)

I have Defi gauges. And it really helps out when you use proprely formed sentences and stuff. I am surprised that we haven't seen leet speak on the forum yet. This place is starting to look like Facebook.

Sent from my SGH-T889 using Tapatalk

I'm surprised the majority of people still walk upright. Still clueless how some get to where they are going...

L33T Z34

06-04-2014 03:34 PM

I'll refrain from posting in "l33t speek" on this 1. :D

oil: Amsoil 5W-30
oil filter: Napa gold / Wix 57356XP
oil cooler: Nissan Motorsports
gauge: Defi-Link meter BF oil pressure
sensor location: where the oil switch use to screw into the "oil pan upper"

My oil idiot switch is gone. I never bothered teeing to the pressure sensor. Disconnecting the oil idiot switch doesn't cause the red oil pressure idiot light to come on. Once my oil is up to 80°C I have the following readings:

idle: 150 kPa
cruise: ~580 kPa (My gearing keeps me @ ~3,100 RPM or >)
WOT: 640 kPa
cold start: 690 kPa
:tiphat:

Nixlimited

06-06-2014 12:14 PM

I'm around 25-30 PSI at idle and between 80-100 when running (usually on the higher end if running fast).

lj909

12-18-2014 12:47 PM

Can an oil pressure sensor be placed in a oil pan tap?

juld0zer

12-18-2014 01:53 PM

nah it wouldnt work there. there's hardly any pressure there otherwise your dipstick would shoot out all the time.

You need to tee off the oil pressure switch port or somewhere after the oil pump

All times are GMT -5. The time now is 07:55 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page