Nissan 370Z Forum - New Clutch Install. Pedal won't return.

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - New Clutch Install. Pedal won't return. (http://www.the370z.com/engine-drivetrain/71135-new-clutch-install-pedal-wont-return.html)

GaleForce

05-19-2013 09:02 PM

Quote:

Originally Posted by Baer383 (Post 2323138)

The only popping noise that I can hear is from under the dash when releasing the clutch pedal the CMC rod comes back and rubs on the the black rubber dust boot and makes a little popping noise.

^^ Yeah, I get this as well.

m3chhawk

05-19-2013 09:06 PM

Yeah I got that for the first 50 miles or so then it went away. This is definitely different. Almost sounds as though the bell housing is hitting a speed bump.......

Baer383

05-19-2013 09:23 PM

The only thing I can think of without hearing it is maybe a slightly loose finger on the pressure plate,b/c when you are at the top with the pedal almost all the way out that is when the least amount of pressure is on the pressure plate,other than that I will think about tomorrow and check your thread with any new thoughts.

m3chhawk

05-28-2013 02:04 PM

Just a quick update...

The "popping" noise that I thought was coming from the clutch, wasn't the clutch. After driving enough, it finally did it when I wasn't using the clutch. I isolated it to slow speed, turning. After playing around enough, I found it was in the same spot, about 75% lock when turning to the right (hence why it was only slow speeds that I noticed it). I somehow bent one of the wire holders and it was banging on the brake line :ugh2:

http://i.imgur.com/NHJGIl5l.jpg
http://i.imgur.com/uWeB6sUl.jpg

Mitco39

05-28-2013 02:54 PM

Glad you found it and caught it before any real damage was done.

All times are GMT -5. The time now is 07:24 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page