|
As I understand it, the throttle body is basically wide open all the time, and the engine is controlled completely by the VVEL system - where the intake timing/lift/duration is
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-25-2009, 06:04 PM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Jun 2009
Location: Jenks, OK
Posts: 2,281
Drives: 370z Touring/Sport
Rep Power: 268   |
question about VVEL, throttlebody, and drive by wire...
As I understand it, the throttle body is basically wide open all the time, and the engine is controlled completely by the VVEL system - where the intake timing/lift/duration is varied to increase/decrease to increase or decrease RPM and/or power.
So...with that, the VVEL system is powered by a DC motor...one for each bank of cylinders, where it controls the lift/duration/timing part of the whole equation (I there's an eccentric shaft that replaces the camshaft, I know...) What happens if one (or both) DC Motor(s) fails and locks up, and say you're going 75MPH down the highway? |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VVEL Only on Intake Valves? | drisko | Engine & Drivetrain | 14 | 09-12-2011 07:35 PM |
| How's the Drive-By-Wire (DBW) throttle? | JTso | Engine & Drivetrain | 32 | 08-22-2010 10:28 PM |
| 370z test drive question??? | Xavier Raymond | Gentleman's Club | 23 | 08-29-2009 07:25 PM |
| Reverse Wire for Backup Cam | bpd138 | Audio & Video | 4 | 05-05-2009 06:56 PM |
| Random thought on Stillen Gen 3 and VVEL | KLRCADI | Intake/Exhaust | 3 | 04-20-2009 10:22 AM |
Threaded Mode
