MAF Intake from Z1...

ezred · 04-01-2013, 01:36 PM

Having trouble installing the passenger side MAF hose. Any tips? The black hose from manifold is not lining up....Thanks...

XwChriswX · 04-01-2013, 02:05 PM

Pictures to help explain what you're talking about? There are a lot of black hoses in the engine bay...

ezred · 04-01-2013, 04:12 PM

Pic on left is the passenger side - hose crimped
Pic on right is driver side - connection is below not seen in pic.

ezred · 04-01-2013, 04:31 PM

ezred · 04-01-2013, 04:40 PM

Pic on left - passenger side crimped
Pic on left - driver side parts off old tube

ezred · 04-01-2013, 04:48 PM

Pic is from drivers side showing the attatchment below MAF tube...

7419sundat · 04-01-2013, 05:05 PM

looks like the hoses are on backwards somehow the z1 emblem should show upwards

ezred · 04-01-2013, 08:13 PM

They are on the upside...need to see the Z emblem when looking at the engine bay...may need a custom fit for the side fit

XwChriswX · 04-01-2013, 08:20 PM

You shouldn't be removing the black plastic harmonics boxes I believe... Unless you have their PCV kit too...

So you essentially are just removing/replacing the Accordion section, nothing else.

Red_Z · 04-01-2013, 09:21 PM

i install mine without the silver thing on the passenger side

ezred · 04-01-2013, 09:26 PM

So is it ok to remove the silver thing from the silicone tubes? They could/would fit then right?

Thanks...

XwChriswX · 04-01-2013, 09:30 PM

Quote:

Originally Posted by ezred

So is it ok to remove the silver thing from the silicone tubes? They could/would fit then right?

Thanks...

No? That's the connector between the two pipes.

Red_Z · 04-01-2013, 09:31 PM

That's the only way I can get everything fit together. No problem so far, but I only have about 500 miles with it

ezred · 04-01-2013, 09:38 PM

The silver connector and the original fittings are the same size, so they will not fit together...

XwChriswX · 04-01-2013, 09:39 PM

04-01-2013, 01:36 PM	#1 (permalink)
ezred Base Member Join Date: May 2011 Location: Red Wing MN Posts: 131 Drives: 2010 Red 370Z 7sp AT Rep Power: 15	MAF Intake from Z1... Having trouble installing the passenger side MAF hose. Any tips? The black hose from manifold is not lining up....Thanks...

04-01-2013, 02:05 PM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	Pictures to help explain what you're talking about? There are a lot of black hoses in the engine bay... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

04-01-2013, 08:20 PM	#9 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	You shouldn't be removing the black plastic harmonics boxes I believe... Unless you have their PCV kit too... So you essentially are just removing/replacing the Accordion section, nothing else. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

04-01-2013, 09:39 PM	#15 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	__________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have K&N Cold Air Intake - Want to swap for Factory Intake	Troyz	Texas	2	03-27-2013 09:48 AM
370z Injen Speed Pro Series Intake \| AEM ETI Intake stupid pricing	Tunerz_Store	Exhaust/Intake	11	11-01-2010 01:43 PM

04-01-2013, 04:31 PM	#4 (permalink)
ezred Base Member Join Date: May 2011 Location: Red Wing MN Posts: 131 Drives: 2010 Red 370Z 7sp AT Rep Power: 15

04-01-2013, 05:05 PM	#7 (permalink)
7419sundat Base Member Join Date: Aug 2011 Location: colorado Posts: 145 Drives: 09 370z Gtm TT 2 Rep Power: 15	looks like the hoses are on backwards somehow the z1 emblem should show upwards

04-01-2013, 08:13 PM	#8 (permalink)
ezred Base Member Join Date: May 2011 Location: Red Wing MN Posts: 131 Drives: 2010 Red 370Z 7sp AT Rep Power: 15	They are on the upside...need to see the Z emblem when looking at the engine bay...may need a custom fit for the side fit

04-01-2013, 09:21 PM	#10 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 16	i install mine without the silver thing on the passenger side

04-01-2013, 09:26 PM	#11 (permalink)
ezred Base Member Join Date: May 2011 Location: Red Wing MN Posts: 131 Drives: 2010 Red 370Z 7sp AT Rep Power: 15	So is it ok to remove the silver thing from the silicone tubes? They could/would fit then right? Thanks...

04-01-2013, 09:31 PM	#13 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 16	That's the only way I can get everything fit together. No problem so far, but I only have about 500 miles with it

04-01-2013, 09:38 PM	#14 (permalink)
ezred Base Member Join Date: May 2011 Location: Red Wing MN Posts: 131 Drives: 2010 Red 370Z 7sp AT Rep Power: 15	The silver connector and the original fittings are the same size, so they will not fit together...