Resetting the stock ECU

Bagged370z · 08-20-2015, 03:57 PM

How many of you or is it important to reset the stock ECU? My profomance mods are Intakes, CBE, and about to install my non-res test pipes.. I won't be able to get UpRev/tuning done for about a week or two. I don't drive my car all that often(50-100miles a week) but am wondering if I should reset the stock ECU after I install my test pipes? Will it run un-efficient if I drive my car in the duration that I don't have UpRev done?

Felix 808 · 08-20-2015, 04:23 PM

It will make adjustments over time on it's own , but resetting the ECU just speeds up the process. Either way your not going to hurt or foul anything. You just won't get the full potential out of the mods until your tune.

Bagged370z · 08-20-2015, 05:10 PM

Thanks you, that answer my question!

Felix 808 · 08-20-2015, 05:26 PM

NP
On a side note, as long as who ever it was did not use an impact wrench to remove your Cats before removing O2 sensors or install your TP's with the sensors installed you'll be OK. If so the O2 sensors are toast as they will not hold up to the vibration & will throw codes straight away & running in that condition will be another story.

Bagged370z · 08-20-2015, 07:59 PM

Quote:

Originally Posted by Felix 808

NP
On a side note, as long as who ever it was did not use an impact wrench to remove your Cats before removing O2 sensors or install your TP's with the sensors installed you'll be OK. If so the O2 sensors are toast as they will not hold up to the vibration & will throw codes straight away & running in that condition will be another story.

So you're saying remove O2 sensors then the cats, install test pipes then reconnect the O2 sensors? Lol

Felix 808 · 08-20-2015, 10:39 PM

Quote:

Originally Posted by Bagged370z

So you're saying remove O2 sensors then the cats, install test pipes then reconnect the O2 sensors? Lol

If you are going to hit it with an impact wrench, absolutely, unless your test pipes don't have the O2 bungs.

08-20-2015, 03:57 PM	#1 (permalink)
Bagged370z Base Member Join Date: Aug 2015 Location: Wisconsin Posts: 66 Drives: 40th Anniversary Rep Power: 9	Resetting the stock ECU How many of you or is it important to reset the stock ECU? My profomance mods are Intakes, CBE, and about to install my non-res test pipes.. I won't be able to get UpRev/tuning done for about a week or two. I don't drive my car all that often(50-100miles a week) but am wondering if I should reset the stock ECU after I install my test pipes? Will it run un-efficient if I drive my car in the duration that I don't have UpRev done?

08-20-2015, 04:23 PM	#2 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2806	It will make adjustments over time on it's own , but resetting the ECU just speeds up the process. Either way your not going to hurt or foul anything. You just won't get the full potential out of the mods until your tune. Trips and SouthArk370Z like this. __________________ Semper Fi Μολὼν λαβέ

08-20-2015, 05:26 PM	#4 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2806	NP On a side note, as long as who ever it was did not use an impact wrench to remove your Cats before removing O2 sensors or install your TP's with the sensors installed you'll be OK. If so the O2 sensors are toast as they will not hold up to the vibration & will throw codes straight away & running in that condition will be another story. __________________ Semper Fi Μολὼν λαβέ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Resetting connect premium	JoshC	Audio & Video	1	02-27-2015 07:52 PM
K&N Drop in Air Filters - is Resetting the ECU necessary??	Vapiano	Intake/Exhaust	10	06-29-2011 12:15 PM
Question on resetting the ECU and adaptives.	Ivoidwarranty	Tuning	6	04-30-2010 12:54 PM
Is resetting the ECU after mods unneccesary?	craniac24	Engine & Drivetrain	4	04-13-2010 05:42 PM
Resetting Oil and Filter Maintenance Reminders	sofaonasock	DIY Section (Do-It-Yourself)	5	12-24-2009 08:13 PM

08-20-2015, 05:10 PM	#3 (permalink)
Bagged370z Base Member Join Date: Aug 2015 Location: Wisconsin Posts: 66 Drives: 40th Anniversary Rep Power: 9	Thanks you, that answer my question!