I may be picking up a TurboXS Knockite for cheap in the next few days, and wanted to see if anyone was using one for knock detection. If so, how/where
|
|
LinkBack | Thread Tools | Display Modes |
11-08-2012, 01:06 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29538 |
Is anyone using a Knocklite?
I may be picking up a TurboXS Knockite for cheap in the next few days, and wanted to see if anyone was using one for knock detection. If so, how/where did you mount it?
|
11-09-2012, 12:46 AM | #2 (permalink) |
Premium Member
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324197 |
Be careful if using the factory knock sensors. They are high impedance and you may load up the circuit if you put the Knocklite in parallel. According to the 2009 FSM (EC-530, see also footnote 1), you should have 2.5V at the sensor terminals at idle. If you have much less than that, the ECM may not be able to adapt. Measure before and after installing the Knocklite.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
11-09-2012, 09:59 AM | #3 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29538 |
Cool, thanks. Good to know.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
Bookmarks |
|
|