Need help!

370guy · 12-16-2011, 06:20 PM

Ok so I just installed the k&n typhoon intake (which I love) but now my windows won't go up automatically. They go Down with one clock but you have to hold the button to make them go up. What did I do? This doesn't make sense to me at all, why would an intake install effect the windows? Any input appreciated. Thanks!

Trips · 12-16-2011, 07:02 PM

WINDOWS NOT WORKING PROPERLY AFTER INSTALL
If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.
________________

370guy · 12-16-2011, 07:35 PM

Got it. Thanks man!

12-16-2011, 06:20 PM	#1 (permalink)
370guy Enthusiast Member Join Date: Sep 2011 Location: knoxvile, TN Posts: 298 Drives: 370+Viper+Vette=Fast Rep Power: 13	Need help! Ok so I just installed the k&n typhoon intake (which I love) but now my windows won't go up automatically. They go Down with one clock but you have to hold the button to make them go up. What did I do? This doesn't make sense to me at all, why would an intake install effect the windows? Any input appreciated. Thanks! __________________ - TopSpeed - Z1 - AMS - K&N - Password:JDM - Nismo - Evo-R - Megan Racing -

12-16-2011, 07:35 PM	#3 (permalink)
370guy Enthusiast Member Join Date: Sep 2011 Location: knoxvile, TN Posts: 298 Drives: 370+Viper+Vette=Fast Rep Power: 13	Got it. Thanks man! __________________ - TopSpeed - Z1 - AMS - K&N - Password:JDM - Nismo - Evo-R - Megan Racing -

12-16-2011, 07:02 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	WINDOWS NOT WORKING PROPERLY AFTER INSTALL If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. ________________