Sticky: (Official) 370Z Clutch Pressure (CSC) Failures

johnwiki · 05-06-2015, 08:01 PM

Not sure if this is the right thread for this, but my clutch failed out on me again. This time they said they called the nissan tech line and they are replacing the line that goes between the slave and master cylinders (clutchline) then theyre going to bleed and see what happens. Anyone else have a similar story?

JARblue · 05-07-2015, 07:47 AM

Quote:

Originally Posted by johnwiki

Not sure if this is the right thread for this, but my clutch failed out on me again. This time they said they called the nissan tech line and they are replacing the line that goes between the slave and master cylinders (clutchline) then theyre going to bleed and see what happens. Anyone else have a similar story?

Sounds like typical dealer

Was the CMC replaced the last time they did the CSC? If not, that likely your culprit. If so, one or the other may have failed again. It wouldn't be the first time.

jwick · 05-07-2015, 07:59 AM

Quote:

Originally Posted by JARblue

Sounds like typical dealer

Was the CMC replaced the last time they did the CSC? If not, that likely your culprit. If so, one or the other may have failed again. It wouldn't be the first time.

Yup. Apparently our CMC are a one use item. Drop the tranny and have to drain the system and it's basically trash.

johnwiki · 05-07-2015, 10:43 AM

This is the third time its been to the dealer. The first time was for the CSC and they didnt replace the CMC. the second time was like 8 months later for the CMC and they replaced that first, said it wasnt holding pressure right, then replaced the CSC again and said it was being right but they bled the system and it was good. A month later (last sunday) the clutch bottomed out on me again and now theyre replacing the clutchline.

Zbrah · 05-07-2015, 11:47 AM

Quote:

Originally Posted by johnwiki

This is the third time its been to the dealer. The first time was for the CSC and they didnt replace the CMC. the second time was like 8 months later for the CMC and they replaced that first, said it wasnt holding pressure right, then replaced the CSC again and said it was being right but they bled the system and it was good. A month later (last sunday) the clutch bottomed out on me again and now theyre replacing the clutchline.

Which dealer has been doing the work and was all three attempts covered under warranty? You should pick up the Zspeed HD csc and a new cmc.
ZSpeed Performance Replacment HD Clutch CSC Heavy Duty Slave Cylinder Kit

johnwiki · 05-07-2015, 07:27 PM

The dealer is Mossy Nissan Kearny Messa, and I only paid for the initial replace of the parts, so one slave and one master. After that whatever they replace is covered under their parts warranty. And they arent charging me for the clutchline.

darkphantom · 05-08-2015, 04:41 PM

Would the dealer install the the aftermarket part if you brought it to them?

JARblue · 05-08-2015, 05:02 PM

Quote:

Originally Posted by darkphantom

Would the dealer install the the aftermarket part if you brought it to them?

Some dealers have, yes. They are in the minority. I doubt any of the ones in Austin will. But there might be different staff/ownership since I was last inquiring about things like that. You will need to call and ask.

If you're not having warranty stuff done, I recommend not using a Nissan dealer for the work. I've heard H&R is good for body stuff. I like Austin Z Clinic for mechanical stuff.

jwick · 05-08-2015, 05:34 PM

Quote:

Originally Posted by darkphantom

Would the dealer install the the aftermarket part if you brought it to them?

Highly unlikely if they are doing warranty work with they install a non OEM replacement. When the dealer replaced my CSC I had to jump thru hopes to get them to use the synthetic fluid I brought them over Nissan fluid.

johnwiki · 05-08-2015, 05:59 PM

This is in Cali. And this dealer might do it, the first time they had to do the csc they asked me if i had any clutch or anything I wanted to put in since they were gonna have the tranny down.

nis350 · 05-08-2015, 11:55 PM

This is crazy... even parts from pepboys last longer....

Quote:

Originally Posted by johnwiki

This is the third time its been to the dealer. The first time was for the CSC and they didnt replace the CMC. the second time was like 8 months later for the CMC and they replaced that first, said it wasnt holding pressure right, then replaced the CSC again and said it was being right but they bled the system and it was good. A month later (last sunday) the clutch bottomed out on me again and now theyre replacing the clutchline.

GeauxTigers1 · 05-09-2015, 01:46 AM

Has nissan upgraded this in any way with the newer models or is this still an issue even on the '15s? Asked my shop and he said the newer models shouldn't have this problem, but I'm a bit wary of it. Figure they fixed the oil temp issue, why not this, but I could be wrong.

jwick · 05-09-2015, 01:49 AM

Quote:

Originally Posted by GeauxTigers1

Has nissan upgraded this in any way with the newer models or is this still an issue even on the '15s? Asked my shop and he said the newer models shouldn't have this problem, but I'm a bit wary of it. Figure they fixed the oil temp issue, why not this, but I could be wrong.

I don't know of any upgrades. This problem has been going on since the 350/G35 days when they went to this design.

blackcherry20 · 05-11-2015, 07:03 PM

I just completed a Nissan owner survey and made several notes related to this issue.
1-they should be using a higher quality part
2-they shouldn't make owners w warranties jump through hoops to get it replaced. Smh.

Jsolo · 05-17-2015, 01:44 PM

Considering how wide spread this problem is, I'm surprised nissan hasn't issued a proper fix for this. I hope anyone that experiences this issue logs a complaint with the ntsb. Most definitely a safety issue. Not a question of if it'll fail but when.

For those who've experienced the failure, does the fluid leaking from the slave ever reach the friction disc? If it does, good way to force a clutch replacement under warranty (assuming the csc fails while still covered).

05-11-2015, 07:03 PM	#509 (permalink)
blackcherry20 A True Z Fanatic Join Date: May 2012 Location: Southern Ohio Posts: 22,749 Drives: ‘17 badazz Z51 Rep Power: 240459	I just completed a Nissan owner survey and made several notes related to this issue. 1-they should be using a higher quality part 2-they shouldn't make owners w warranties jump through hoops to get it replaced. Smh. JARblue likes this. __________________ Grand Sport Corvette Arctic White

05-17-2015, 01:44 PM	#510 (permalink)
Jsolo Track Member Join Date: Dec 2011 Location: chicago Posts: 783 Drives: '12 G37 6MT Rep Power: 14	Considering how wide spread this problem is, I'm surprised nissan hasn't issued a proper fix for this. I hope anyone that experiences this issue logs a complaint with the ntsb. Most definitely a safety issue. Not a question of if it'll fail but when. For those who've experienced the failure, does the fluid leaking from the slave ever reach the friction disc? If it does, good way to force a clutch replacement under warranty (assuming the csc fails while still covered). __________________ G37S Sedan 6MT, Eibach swaybars, Invidia Exhaust, Weaker Clutch Pedal Spring For sale links

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[STICKY] How much did you pay for your 370Z? (Australian Version) [STICKY]	AK370Z	Australia/New Zealand	155	03-20-2021 07:35 AM
Sticky: 370Z Transmission Failures (6MT)	DIGItonium	Engine & Drivetrain	104	02-25-2021 10:19 AM
[FOR SALE] 370z clutch, flywheel & pressure plate	40flash	Parts for sale (Private Classifieds)	2	06-11-2012 08:10 AM
CSC Acting UP? Sticky Clutch captured on video.. help?	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	7	12-23-2011 09:33 PM
370Z flywheel, pressure plate & Clutch disc	40flash	Parts for sale (Private Classifieds)	2	07-23-2010 07:03 AM

05-06-2015, 08:01 PM	#496 (permalink)
johnwiki Base Member Join Date: Oct 2013 Location: California Age: 32 Posts: 66 Drives: 2011 Gun Metallic Z Rep Power: 11	Not sure if this is the right thread for this, but my clutch failed out on me again. This time they said they called the nissan tech line and they are replacing the line that goes between the slave and master cylinders (clutchline) then theyre going to bleed and see what happens. Anyone else have a similar story?

05-07-2015, 10:43 AM	#499 (permalink)
johnwiki Base Member Join Date: Oct 2013 Location: California Age: 32 Posts: 66 Drives: 2011 Gun Metallic Z Rep Power: 11	This is the third time its been to the dealer. The first time was for the CSC and they didnt replace the CMC. the second time was like 8 months later for the CMC and they replaced that first, said it wasnt holding pressure right, then replaced the CSC again and said it was being right but they bled the system and it was good. A month later (last sunday) the clutch bottomed out on me again and now theyre replacing the clutchline.

05-07-2015, 07:27 PM	#501 (permalink)
johnwiki Base Member Join Date: Oct 2013 Location: California Age: 32 Posts: 66 Drives: 2011 Gun Metallic Z Rep Power: 11	The dealer is Mossy Nissan Kearny Messa, and I only paid for the initial replace of the parts, so one slave and one master. After that whatever they replace is covered under their parts warranty. And they arent charging me for the clutchline.

05-08-2015, 04:41 PM	#502 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 243	Would the dealer install the the aftermarket part if you brought it to them?

05-08-2015, 05:59 PM	#505 (permalink)
johnwiki Base Member Join Date: Oct 2013 Location: California Age: 32 Posts: 66 Drives: 2011 Gun Metallic Z Rep Power: 11	This is in Cali. And this dealer might do it, the first time they had to do the csc they asked me if i had any clutch or anything I wanted to put in since they were gonna have the tranny down.

05-09-2015, 01:46 AM	#507 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6744	Has nissan upgraded this in any way with the newer models or is this still an issue even on the '15s? Asked my shop and he said the newer models shouldn't have this problem, but I'm a bit wary of it. Figure they fixed the oil temp issue, why not this, but I could be wrong.