JWT clutch is just too damn good... unfortunately...

LateralG'z · 07-15-2010, 08:20 PM

Quote:

Originally Posted by KillerBee370

Car's fixed and ready for pickup. Stock clutch back in and while talking to the tech he corrected himself and said it was definitely the concentric secondary cylinder.

I am getting back the JWT clutch (obviously) and the technician said that he included everything to give back to me including the CSC. I will post up some pics tomorrow and see if I can get this thing into the hands of someone if they need it for R&D purposes in order to engineer an aftermarket piece/part.

You da man!

Seb@SZ · 07-15-2010, 11:24 PM

Quote:

Originally Posted by KillerBee370

Car's fixed and ready for pickup. Stock clutch back in and while talking to the tech he corrected himself and said it was definitely the concentric secondary cylinder.

I am getting back the JWT clutch (obviously) and the technician said that he included everything to give back to me including the CSC. I will post up some pics tomorrow and see if I can get this thing into the hands of someone if they need it for R&D purposes in order to engineer an aftermarket piece/part.

You have PM.

m4a1mustang · 07-15-2010, 11:25 PM

Quote:

Originally Posted by Seb@SZ

You have PM.

KillerBee370 · 07-15-2010, 11:27 PM

PM replied!

Trips · 07-15-2010, 11:29 PM

Great to Hear the Bee's going Home!

KillerBee370 · 07-15-2010, 11:32 PM

Quote:

Originally Posted by Triple's

Great to Hear the Bee's going Home!

Ugh.. me too. And as a little treat to the bee... new Challenge coilovers going on as well as that Seibon NS-style carbon fiber front lip!

BOLIO 671 · 07-18-2010, 07:29 PM

So the failure of the Concentric Slave Cylinder (CSC) basically caused the Clutch Master Clyinder to give out and spill all the fluid then?

KillerBee370 · 07-18-2010, 07:51 PM

Quote:

Originally Posted by BOLIO 671

So the failure of the Concentric Slave Cylinder (CSC) basically caused the Clutch Master Clyinder to give out and spill all the fluid then?

I guess that's the verdict.

So I got my car back with stock clutch back in place (which feels like there's nothing there ugh

) and the tech didn't put the damn failed CSC in the car. WTF? I got the aftermarket clutch back but he said he would give me the failed parts. I was looking forward to taking some pics for you guys and getting them into the hands of an aftermarket vendor but no dice.

I put a call in to get the CSC but he still hasn't returned my call yet.

Valentino · 07-18-2010, 08:22 PM

KillerBee370 · 07-18-2010, 08:30 PM

Quote:

Originally Posted by Valentino

Tell me about it! I'm going to call and hound him tomorrow to get my hands on the part/s. I paid for them when I bought the car and I want them back.

1slow370 · 07-19-2010, 07:09 AM

well i had a second one lying around so i tore it the hell apart today and from what i can see it doesn't look good for the french. the csc is a metal can that snaps into a plastic base (tis a pain to get apart) either way that plastic base is really brittle and so is the plastic piston (yup this beeyotch puts hundreds of pounds of force on a small plastic ring that looks like small piece of prepreg nylon about a half inch long with a seal molded to one end). The bearing is snapped onto the plastic piston and held in place with a tiny metal ring. but the main thing i noticed is that i had only 9,000 miles on this thing and while it was still working when i took it out, after removing the metal sleeve from the base i found a film of clutch fluid all over the inside where it shouldn't be so my guess is it was seeping past the O-ring in the base.

The thing is injection molded so because some of the features are hard to machine it looks i'll have to make a few changes to it for the new one. I can't wait to put the clutch and flywheel back in.

DIGItonium · 07-19-2010, 08:34 AM

Is this why clutch play gets worse over time? So far it's hovering around 1-2" instead of nothing when it was brand new.

1slow370 · 07-24-2010, 06:41 AM

from what i see the whole assembly is just plain bad and i don't have the slightest clue why the they would do this other than corporate resource sharing with renault and bureaucratic cost savings contracts with the valeo company (in france). after the problems with the hr engines you would figure they would do a redesign and throw the plastic POS out but no, they probably just upgraded the grade of pre-preg and called it a day. the other thing i noticed is that the csc has the fluid dampening restrictions built into it that is very likely the cause of many of the slipping clutches, and stuck disengagement problems as well i wish i could remember who it was that was at the track and his clutch got stuck to the floor cause this is for him. there is a tiny little oriface that actually feeds the fluid in and out of the piston. they make it supper small so that while clutch disengagement remains normal due to the high pressure as the clutch is engaging this tiny hole causes the clutch to slip due to slowing down the fluid as it returns to the master cylinder. on the street this means smoother engagement for novice drivers, on the track shifting quickly this means extremely elevated line pressure right where the stupid tiny O-ring between the steel sleeve and the plastic housing is causing more stress on the CSC during disengagement, and a stuck or burning clutch on the engagement.

This is a very common problem on 98+ gm vehicles with the ls v8's, documented in a few magazines but luckily for them their CSC is an aluminum piece not plastic, and GM put the restriction in the clutch line not in the actual part sou could just drill out the restriction with an 1/8th inch drill bit and you never had problems again until the bearing failed.

LateralG'z · 07-27-2010, 07:20 PM

Good info thanks for the post +1

LateralG'z · 08-06-2010, 09:47 PM

Bump, Can you post pics of this assembly?

07-15-2010, 11:29 PM	#5 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland Posts: 8,736 Drives: 🔰 Rep Power: 10	Great to Hear the Bee's going Home! __________________

07-18-2010, 07:29 PM	#7 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3401	So the failure of the Concentric Slave Cylinder (CSC) basically caused the Clutch Master Clyinder to give out and spill all the fluid then? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

07-18-2010, 08:22 PM	#9 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 307	__________________ Lou Fusz Nissan \| KW V3 \| SPL rear camber and toe bolt \| OS Giken LSD \| Nismo Diff cover \| Engine Oil cooler \| F.I. TDX Cat Back 18" Resonators \| F.I. Resonated Test Pipes \| Injen cold air intake \| COBB AccessPORT \| JWT Clutch Flywheel \|

07-19-2010, 07:09 AM	#11 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	well i had a second one lying around so i tore it the hell apart today and from what i can see it doesn't look good for the french. the csc is a metal can that snaps into a plastic base (tis a pain to get apart) either way that plastic base is really brittle and so is the plastic piston (yup this beeyotch puts hundreds of pounds of force on a small plastic ring that looks like small piece of prepreg nylon about a half inch long with a seal molded to one end). The bearing is snapped onto the plastic piston and held in place with a tiny metal ring. but the main thing i noticed is that i had only 9,000 miles on this thing and while it was still working when i took it out, after removing the metal sleeve from the base i found a film of clutch fluid all over the inside where it shouldn't be so my guess is it was seeping past the O-ring in the base. The thing is injection molded so because some of the features are hard to machine it looks i'll have to make a few changes to it for the new one. I can't wait to put the clutch and flywheel back in. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-19-2010, 08:34 AM	#12 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 44	Is this why clutch play gets worse over time? So far it's hovering around 1-2" instead of nothing when it was brand new. __________________

07-15-2010, 11:27 PM	#4 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 53 Posts: 5,964 Drives: with passion Rep Power: 323	PM replied!

07-24-2010, 06:41 AM	#13 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	from what i see the whole assembly is just plain bad and i don't have the slightest clue why the they would do this other than corporate resource sharing with renault and bureaucratic cost savings contracts with the valeo company (in france). after the problems with the hr engines you would figure they would do a redesign and throw the plastic POS out but no, they probably just upgraded the grade of pre-preg and called it a day. the other thing i noticed is that the csc has the fluid dampening restrictions built into it that is very likely the cause of many of the slipping clutches, and stuck disengagement problems as well i wish i could remember who it was that was at the track and his clutch got stuck to the floor cause this is for him. there is a tiny little oriface that actually feeds the fluid in and out of the piston. they make it supper small so that while clutch disengagement remains normal due to the high pressure as the clutch is engaging this tiny hole causes the clutch to slip due to slowing down the fluid as it returns to the master cylinder. on the street this means smoother engagement for novice drivers, on the track shifting quickly this means extremely elevated line pressure right where the stupid tiny O-ring between the steel sleeve and the plastic housing is causing more stress on the CSC during disengagement, and a stuck or burning clutch on the engagement. This is a very common problem on 98+ gm vehicles with the ls v8's, documented in a few magazines but luckily for them their CSC is an aluminum piece not plastic, and GM put the restriction in the clutch line not in the actual part sou could just drill out the restriction with an 1/8th inch drill bit and you never had problems again until the bearing failed. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-27-2010, 07:20 PM	#14 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 18	Good info thanks for the post +1 __________________ 2010 Mag Black, 6MT,

08-06-2010, 09:47 PM	#15 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 18	Bump, Can you post pics of this assembly? __________________ 2010 Mag Black, 6MT,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
very loud clutch chatter when in first gear and i depress the clutch...	TheSnakeJake	Engine & Drivetrain	30	04-25-2010 12:07 AM
Damn that paint.	Vegitto-kun	Exterior & Interior	43	04-21-2010 07:57 AM
Damn...........	vash_241987	The Lounge (Off Topic)	8	02-13-2010 12:10 AM
Damn fatties!	MightyBobo	The Lounge (Off Topic)	3	01-04-2010 10:19 PM
Damn Dealers	SlikNik	Nissan 370Z General Discussions	5	05-29-2009 08:48 PM