Oil evacuator.

blackflag · 02-15-2010, 02:33 AM

Does anybody know yet if an oil evacuator works with this engine?

Modshack · 02-15-2010, 12:48 PM

Quote:

Originally Posted by blackflag

Does anybody know yet if an oil evacuator works with this engine?

A ton of them here: Amazon.com: oil evacuator

There's nothing special about our engine that would require anything special.

37Z · 02-16-2010, 07:36 PM

I used a similar one for many years as seen in Modshack's link. First use was with my boat. Due to limited space (boats do not have space to place a oil pan under the engine) necessitated purchasing one! Their are several manual (vacuum) types and several electric types. Some manual types take less time to create a vacumm. At the track, the manual type is likely the only option. Electric ones can be either 12-volt or household power (120 AC).

Some types can be used for bleeding the brake fluid.

Most marine supply stores stock these.

blackflag · 02-16-2010, 10:07 PM

Somebody said that they couldn't get the tube all the way to the bottom of the pan on this engine, (the Infiniti, I think). That's why I was wondering if anybody has tried it yet. I'm not looking forward to crawling under this thing.

semtex · 02-17-2010, 08:36 AM

Evacuators work fine with this car. It's a straight shot down to the oil pan. Doesn't get much straighter than this.

semtex · 02-17-2010, 08:37 AM

Btw, you're still going to have to crawl under the car to change the oil filter. There's no getting around that.

cotizi · 02-17-2010, 08:38 AM

semtex, out of curiousity where are you getting your exploded parts views? What manual are they found in? I want!

semtex · 02-17-2010, 08:39 AM

The service manual.

370Zsteve · 02-17-2010, 08:51 AM

rofl

02-15-2010, 02:33 AM	#1 (permalink)
blackflag Base Member Join Date: Jan 2010 Location: US Posts: 121 Drives: 2009 Z 6M base. Rep Power: 15	Oil evacuator. Does anybody know yet if an oil evacuator works with this engine?

02-16-2010, 07:36 PM	#3 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 262	Oil extractors I used a similar one for many years as seen in Modshack's link. First use was with my boat. Due to limited space (boats do not have space to place a oil pan under the engine) necessitated purchasing one! Their are several manual (vacuum) types and several electric types. Some manual types take less time to create a vacumm. At the track, the manual type is likely the only option. Electric ones can be either 12-volt or household power (120 AC). Some types can be used for bleeding the brake fluid. Most marine supply stores stock these.

02-17-2010, 08:36 AM	#5 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Evacuators work fine with this car. It's a straight shot down to the oil pan. Doesn't get much straighter than this. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

02-17-2010, 08:37 AM	#6 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Btw, you're still going to have to crawl under the car to change the oil filter. There's no getting around that. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

02-17-2010, 08:38 AM	#7 (permalink)
cotizi Enthusiast Member Join Date: Mar 2009 Location: Austin, Tx Posts: 391 Drives: 2012 VW GTI 6MT Rep Power: 217	semtex, out of curiousity where are you getting your exploded parts views? What manual are they found in? I want! __________________ Past - 2009 Silver 6MT Sport 370Z Current - 2012 VW GTI 6-Speed

02-16-2010, 10:07 PM	#4 (permalink)
blackflag Base Member Join Date: Jan 2010 Location: US Posts: 121 Drives: 2009 Z 6M base. Rep Power: 15	Somebody said that they couldn't get the tube all the way to the bottom of the pan on this engine, (the Infiniti, I think). That's why I was wondering if anybody has tried it yet. I'm not looking forward to crawling under this thing.

02-17-2010, 08:39 AM	#8 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	The service manual. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

02-17-2010, 08:51 AM	#9 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 42	rofl __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS.