Evap hoses help?

Roy760

my hoses from the purge valve and down seem to have split and broken off recently, now the left side of the pictured hose seems easy to put back, but I can’t for the life of me see how to reach the other side of the right side of this hose is way longer and can’t find any information online on a diy to switch it! It’s the one that goes down under the battery area of the engine bay. Even with the passenger intake removed I can’t even fit my hand down far enough to even feel for a clamp let alone install the other side of the replacement . Before I shell out hours of labor at a mechanic, anyone have any advice? It’s part 14912-jk25b!

Attached Images

IMG_1241.jpg (285.7 KB, 9 views)

NorthStyle

It's held on by a clamp similar to the engine-side. The connection goes to a hard line near the battery compartment (alongside the fuel lines); you'll need to remove the intake pipes to get a semi-good view of it. It's in an area where it's hard to see from the top or the bottom so feeling around with your hand or using a boroscope will be the easiest method to find it.

ZoomZ

Try from under the car?

__________________
“Action without vision is a nightmare.”