Nissan 370Z Forum - Gallery Gasket Time?

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - Gallery Gasket Time? (http://www.the370z.com/engine-drivetrain/136963-gallery-gasket-time.html)

Rojoryu

11-27-2021 04:47 PM

Quote:

Originally Posted by Averying (Post 4014452)

If you have a set of digital calipers u might be able to measure the thread size/pitch yourself.

I got a pitch gauge and found my calipers, I was able to successfully clean the threads up. In case this ever happens to anyone else, the correct size tap is an M16 x 1.5.

Rojoryu

11-29-2021 05:19 PM

1 Attachment(s)

It’s alive! Around 100 on cold start, floating in the 20’s at about 160 degrees.

redondoaveb

11-29-2021 05:28 PM

Quote:

Originally Posted by Rojoryu (Post 4014853)

It’s alive! Around 100 on cold start, floating in the 20’s at about 160 degrees.

Great job!

Averying

11-29-2021 05:37 PM

Gallery Gasket Time?

Where is your sensor located and what oil are you using? Just curious

And how long did it take you to swap the gaskets?

Rojoryu

11-29-2021 05:45 PM

Quote:

Originally Posted by Averying (Post 4014858)

Where is your sensor located and what oil are you using? Just curious

And how long did it take you to swap the gaskets?

I tee’d from the factory sensor right before the oil filter. Using 0w-40. It took me a little over a week but in my defense 4 days was spent waiting for some additional parts.

Rusty

11-29-2021 06:00 PM

Good job. :tup:

I have a Sucker Punch oil pump and the ESP gaskets waiting on me for when I get the energy to do it.

All times are GMT -5. The time now is 08:59 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page