Nissan 370Z Forum - My diff Rebuild plan

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - My diff Rebuild plan (http://www.the370z.com/engine-drivetrain/136784-my-diff-rebuild-plan.html)

chendaxian888

10-13-2021 11:17 PM

Quote:

Originally Posted by Rusty (Post 4011234)

So....... you haven't done this yet?

Give you a tip on the crush sleeve. If you over tighten it. It's junk. It's a one time deal. Then you have to use another new sleeve again.

forgot tell you guys I crashed my last car and I bought a new manual base and started my new concept to race the car

chendaxian888

10-16-2021 09:35 PM

Quote:

Originally Posted by Rusty (Post 4011142)

Which diff did you go with?

The vent tube should have been installed before bolting the diff cover to the diff housing. Less chance of getting metal shaving in the diff.

Did you reuse the stock shims or did you have to use other shims?

How hard is rebuilding the final gear? should I leave my 3.6 finial gear and dont touch it for easier installation?

Chuck33079

10-17-2021 06:26 AM

Quote:

Originally Posted by chendaxian888 (Post 4011277)

forgot tell you guys I crashed my last car and I bought a new manual base and started my new concept to race the car

Imagine our surprise that you balled up a perfectly good car driving like an idiot.

Sent from my iPhone using Tapatalk

SG4247

10-17-2021 12:43 PM

Nothing is too hard, if you are determined to learn how, and get the right tools.

All times are GMT -5. The time now is 08:19 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page