Camshaft advance angle on B1 stuck on -128

Tosh · 10-03-2022, 03:30 PM

Hello All, this is my first thread here, so first I want to congratulate everyone for making this board as awesome as it is.

For a few months now I have a cool orange (pics soon) 2011 370z. I have around 3000 miles on it and I'm getting comfortable with the specifics of the car. I got a Kiwi 3 OBD scanner which I'm using with Torque Pro and a plugin for Nissan to get some specific engine parameters.

I'm worried about the camshaft advance angles on B1 and B2. B2 is reported, changing and overall looks right. B1 is stuck to -128 all the time. Checked the car on a professional diagnostic equipment (not Nissan official) and it didn't read any value for B1.
Swapping the sensors did not change anything, so they should be fine.
It's worth mentioning that around 1000 miles after resetting LTFTs, the B2 side got around 3, B1 side stays on 0.

While driving the car feels good (as far as I can tell), except when the weather is very hot. When outside temp goes over 85F during city driving, it slightly loses power on low RPM and has jerky acceleration. This could be because of the KN short ram intakes, the previous owner fitted (and I plan to get rid of).

Tosh · 10-24-2022, 02:28 PM

Is it normal not have that reading on one side only?
Thanks!

SonicVQ · 10-25-2022, 06:39 AM

Yes it seems to be normal... My G37 shows the same and I suspect this is a bug in the ECU and it just returns -128.

10-03-2022, 03:30 PM	#1 (permalink)
Tosh Base Member Join Date: Sep 2021 Location: Bulgaria Posts: 5 Drives: 2011 Nissan 370z MT Rep Power: 3	Camshaft advance angle on B1 stuck on -128 Hello All, this is my first thread here, so first I want to congratulate everyone for making this board as awesome as it is. For a few months now I have a cool orange (pics soon) 2011 370z. I have around 3000 miles on it and I'm getting comfortable with the specifics of the car. I got a Kiwi 3 OBD scanner which I'm using with Torque Pro and a plugin for Nissan to get some specific engine parameters. I'm worried about the camshaft advance angles on B1 and B2. B2 is reported, changing and overall looks right. B1 is stuck to -128 all the time. Checked the car on a professional diagnostic equipment (not Nissan official) and it didn't read any value for B1. Swapping the sensors did not change anything, so they should be fine. It's worth mentioning that around 1000 miles after resetting LTFTs, the B2 side got around 3, B1 side stays on 0. While driving the car feels good (as far as I can tell), except when the weather is very hot. When outside temp goes over 85F during city driving, it slightly loses power on low RPM and has jerky acceleration. This could be because of the KN short ram intakes, the previous owner fitted (and I plan to get rid of).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camshaft position sensor bad?	MSC43	Engine & Drivetrain	7	10-24-2021 02:15 PM
advance the timing with uprev	MTCRnismo	Tuning	17	07-05-2020 10:39 AM
Defi Advance gauges	dts3	DIY Section (Do-It-Yourself)	0	10-05-2018 07:41 PM
[WTB] Camshaft Sensor Harness	Z_Society	Parts for sale (Private Classifieds)	0	03-05-2016 06:17 PM
Jun camshaft .. Help !!	elia_ebyss	Engine & Drivetrain	149	10-24-2014 09:05 AM

10-24-2022, 02:28 PM	#2 (permalink)
Tosh Base Member Join Date: Sep 2021 Location: Bulgaria Posts: 5 Drives: 2011 Nissan 370z MT Rep Power: 3	Is it normal not have that reading on one side only? Thanks!

10-25-2022, 06:39 AM	#3 (permalink)
SonicVQ Base Member Join Date: Jan 2016 Location: Ontario Posts: 230 Drives: G37 Sport Rep Power: 6720	Yes it seems to be normal... My G37 shows the same and I suspect this is a bug in the ECU and it just returns -128.