Stuck electrical connector on valve cover

david90 · 08-01-2020, 08:12 PM

I need some help removing the yellow connector in the picture below. The connector is mounted to the valve cover which I'm trying to remove. To make things worst the connector is in the corner that doesn't give me room to pull. The wiring on the tabbed connector has no slack and the mating connector is mounted to the valve cover.

To remove the connector, I have to press on the tab and then pull out the connector?

Is there a tool or technique that can help? I already tried lubing the connector with wd40.

BettyZ · 08-01-2020, 09:57 PM

https://www.amazon.com/dp/B0012S99ZQ..._9TIjFbJVMM25H

I've found these are helpful for pulling recalcitrant connectors.

Sent from my SM-G955U using Tapatalk

david90 · 08-04-2020, 01:23 AM

Finally got it out with a long needle nose plier. I had to lift the tab to disconnect the connector.

08-01-2020, 08:12 PM	#1 (permalink)
david90 Base Member Join Date: Dec 2013 Location: US Posts: 8 Drives: 380z Rep Power: 11	Stuck electrical connector on valve cover I need some help removing the yellow connector in the picture below. The connector is mounted to the valve cover which I'm trying to remove. To make things worst the connector is in the corner that doesn't give me room to pull. The wiring on the tabbed connector has no slack and the mating connector is mounted to the valve cover. To remove the connector, I have to press on the tab and then pull out the connector? Is there a tool or technique that can help? I already tried lubing the connector with wd40. Last edited by david90; 08-01-2020 at 08:15 PM.

08-01-2020, 09:57 PM	#2 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	https://www.amazon.com/dp/B0012S99ZQ..._9TIjFbJVMM25H I've found these are helpful for pulling recalcitrant connectors. Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
leaking slight oil from Valve Cover	megalapagas	Engine & Drivetrain	30	04-19-2017 09:32 AM
[FOR SALE] Used camshaft valve cover left and right	NeverBoneStck	Parts for sale (Private Classifieds)	0	10-25-2016 02:54 PM
OEM electrical connector part numbers	zguynate	Engine & Drivetrain	1	03-03-2016 10:47 PM
Need replace the valve cover. Help needed.	chuan.1992	Engine & Drivetrain	8	03-22-2013 11:06 AM
Valve cover breathers?	bigrob126	Intake/Exhaust	5	06-24-2011 04:25 PM

08-04-2020, 01:23 AM	#3 (permalink)
david90 Base Member Join Date: Dec 2013 Location: US Posts: 8 Drives: 380z Rep Power: 11	Finally got it out with a long needle nose plier. I had to lift the tab to disconnect the connector.