1/8 npt y adapter
 

Does anyone know a company that might stock this style y adapter? What I'm actually looking for is the single side being male 1/8th npt and on the y side it needs to be both female 1/8th npt.

I thought I could use this Edelbrock adapter and just take the male fittings out of the y side but Edelbrock has discontinued them and doesn't have any in stock.

I googled 1/8 npt y fitting and got several hits.


Kirk B.

I googled the hell out of exactly what I'm looking for and only got the one for Edelbrock. Possible you could send me a couple links. Would be appreciated. :bowrofl:

Never bought anything from this company; but you could add a male 1/8xclose...or Farr :tiphat:

I got suckered. They were all 1/4" or for beer.
Sorry dude. I jumped when I should have looked.


Kirk B.

Try JEGS. They have more stuff like this then Summit. I get all of my AN parts and braided lines from them.

Also look underneath some brands like Parker, Imperial or Weatherhead :ugh2:
Lots more out there; may have to get hydraulic fittings instead of brass, as it would be steel :eek:

If you're looking to tap off the oil pressure sensor port, those adapters are prone to leaking due to the factory sensor being so heavy, I recommend doing a jumper line and a distribution block.

I used this

https://www.instagram.com/p/BU5QJRQgBtB/

https://raceenergyperformance.com/pr...ribution-block

I did find that one but I'm hesitating on buying from china unless I can't find anything else.

I saw those same one's. :rofl2:

Thanks, that distribution block may work, i need to look a little closer at my clearance issue

No luck on Jegs.

The one I used for my oil pressure gauge is no longer made. :icon14:

I found a couple of the Edelbrock ones on ebay but I had to message the sellers to make sure they stock them and not shipping from the manufacturer. Both sellers are automotive companies.

what are you using it for?

Contact MA Motorsports, I'm quite sure they stock them

Sent from my SM-G973F using Tapatalk

I was looking at a website called hoseandfittings.com :twocents:

Even if you don’t purchase from Chins; don’t be surprised if it says China on the fitting when you get one :wtf2:

Oil pressure gauge

Did you try Pegasus?

I couldn't find one there either

No doubt. I was hoping to not have to wait a month for delivery though. That's a last resort.

I'm guessing you aren't using the stock lines if you're looking for NPT fittings? There are links in the DIY Oil Pressure Gauge thread:

http://www.the370z.com/diy-section-d...ure-gauge.html
Here's the items it lists:
https://shop.hoseandfittings.com/cat...-02-02-02.html
3036-02-02 | Male BSPT x Female NPT Pipe Adapter

When I get home. I'll post a link for the one I got. They still may have them.

i have an adaptor that has 1 male bpt to to female bpt and 1 female npt if you need it the factory thread in the block is bpt if you need it let me know

Thanks to everyone for their help with this search. I called Drift HQ in Florida and spoke with Jo'el. I was on the phone with him for about a half hour while he searched all over for me. He then called Edelbrock and lo and behold, they had two in stock so he ordered one for me. What a super guy, he went out of his way to help me, I really appreciate his help, I'll be doing business with him in the future.

And even though I just bought one of their products (because I was so desperate), screw Edelbrock. They f'n lied to me. I called them yesterday and the sales guy I talked to said he verified they had none in stock. I guess they were saving what they had in stock for their vendors.

Heck, I probably got one in my toolbox :ugh2: