05-27-2019, 06:15 PM
|
#24 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974725
|
Quote:
Originally Posted by Jmatchley86
No idea, from what i have gathered there are 3 different sensors that can either come loose or be broken. So far i have checked both under the clutch area with 0 success. headed to the dealership tomorrow to see if they can sort it out.
|
Your posts are describing a top clutch switch that needs adjustment. When your top clutch switch is out of adjustment, the control systems are unable to determine when you have your foot on the clutch or not.
Your current switch adjustment is not allowing the switch to fully close when your foot is off the pedal. This means the control system believes your foot is constantly on the clutch pedal as you are driving. S-Mode will work for a while and then it will eventually fault because it never sees you letting off the pedal.
So that is why it starts working again after you reset, because you start the cycle over. If you go under your dash and adjust the top clutch switch so that it fully closes when you let go of the pedal, your S-Mode will return to normal and your cruise control will start working again. It is a very simple adjustment. Loosen the lock nut, thread the switch closer to the pedal, then tighten the lock nut, done.
|
|
|
Similar Threads
21Likes
Threaded Mode
