Nissan 370Z Forum - RJM clutch pedal adjustment

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - RJM clutch pedal adjustment (http://www.the370z.com/engine-drivetrain/127103-rjm-clutch-pedal-adjustment.html)

redondoaveb

05-23-2018 10:44 PM

RJM clutch pedal adjustment

I want to adjust my RJM pedal so that the clutch release point is closer to the floor. Should this be done with the AFP slide plate (raising it to a higher number) or by adjusting the clutch rod? I know I'll need to adjust both switches with either of those adjustments. I didn't do the initial installation so I'm trying to get familiar with how it works.

lj909

05-23-2018 10:54 PM

You can do both. If your MC is the stock one probably won't have much rod adjustment

redondoaveb

05-23-2018 11:01 PM

Quote:

Originally Posted by lj909 (Post 3758786)

You can do both. If your MC is the stock one probably won't have much rod adjustment

Yeah, mc is stock. AFP is set at factory 75%, I'll go ahead and raise the slide plate.
Thanks

dboss

10-24-2018 05:01 PM

My clutch point seems to be way too high no matter what settings I use. It feels like the car isn’t fully in gear and feels like it’s slipping even though the top switch is adjusted properly. My car doesn’t feel right after installing

JARblue

10-24-2018 07:36 PM

With the OEM CMC, the slide plate is pretty much the only way. I'd ask Ryan if you have any specifics - he has tremendous customer service.

I've had two different RJM pedals installed and been supremely happy with both compared to the stock clutch pedal.

All times are GMT -5. The time now is 01:11 PM.