4.08 gear swap
took a ride up to monroe,nc today, to SOHO motorsports. i had them swap out my gears along with a set of whiteline bushings while the chunk was out.very friendly people to deal with. the gears really wake this thing up. it should have come from Nissan like this. the bushings made a big difference too. on cold pavement, NO wheel hop like normal.their new building is really alot snazzier than the old one. will be very happy to do business with them in the future.
|
sounds good...enjoy Christopher!
|
Yes I love my 4.08 ! :driving:
|
I'm thinking about doing the same thing, but leaning toward 4.36. If your car was 90% track use, would you stick with 4.08 or go with 4.36?
|
i never take it to the track, its my DD, just a lot of spirited runs around town, and when i find some curvy roads. on the highway with 305/30 on rears, im taching right about 3400 at 80moph. but it really runs up through the gears alot quicker. probably would depend on how long the staights are. maybe someone with some track experience could tell you better.
|
Any shops on the west coast any can suggest for such an install?
|
lovin my 4.08 as well, acceleration pulls well for stock
|
4.08 gears for the win!
Sent from my iPhone using Tapatalk |
Quote:
you're pretty far away from livermore but i'd imagine you could freight it over to him or something |
Yeah the SOHO shop is nice, good bunch of guys. They put my amuse exhaust on a couple months ago... too bad this exhaust is not staying on. Car will have 1500 miles on it and it's 3rd exhaust lol
|
Was all set to turn 4.08 gears, but ended up going forced induction instead and that's probably a little over the top for the setup so will run the stockers and see how it goes. If there is still room for them in the setup then they will go in for sure :)
|
nik swapped my uprev tune over to ecutec and really did a fantastic job with it. night and day difference.he was also the one who suggested installing whiteline bushings while the chunk was out . they really know their way around these cars. being a 100 miles away helps. also
|
Does your cruise control still work after the new gears?
|
haven evan tried it. i dont use cruise on any of my rides. i will try today and let you know. dont really see why it would affect it.
|
cruise works just fine
|
All times are GMT -5. The time now is 12:10 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2