10-11-2015, 07:09 AM
|
#8 (permalink)
|
|
Base Member
Join Date: Sep 2013
Location: Montréal, Canada
Posts: 16
Drives: 370Z,2009,Black,M6
Rep Power: 12
|
Quote:
Originally Posted by DOOMMONKEY777
Ehh, on the z1 csc elimination kit, the rod thats comming to pull the lever of the bearing that presses the clutch plate, if it isnt adjusted properly it will not pull enoughf to release the clutch, i hope am making sence here, or you might have a bubble in the system or clutch pedal isnt adjusted properly to push the cmc all the way in.
Basicaly the travel isnt enoughf to clutch, isnt thats ur problem?
PS u gotta to test be4 u race. Now it seems ur syncronos r done, try putting radline oil in ur tranny did me hella good with shifting. It could be just cheapo oil in it, this transmission hates bad viscosity.
|
I am back with the Z speed CSC (which work the same as the OEM). Oil is top quality synthetic and it is purged twice a summer. Could be air though ....
I will bleed it again this week
|
|
|
Similar Threads
Threaded Mode
