Nissan 370Z Forum - Intake manifold

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - Intake manifold (http://www.the370z.com/engine-drivetrain/101123-intake-manifold.html)

Schsplayer00

02-23-2015 05:32 PM

Yea I compsred the 370 stock one and he bolt holes don't match up. So it's not a stock one lol. Not just have to figure out of its a 350z one. So it's still a good mod?? I just need to figure out a cover for it Becuase the stock engine cover dosent fit it.

DEpointfive0

02-23-2015 05:33 PM

Quote:

Originally Posted by Schsplayer00 (Post 3120152)

But the screw holes do not match up with a stock manifold

Oh...

Quote:

Originally Posted by Trilitheum (Post 3120157)

More midrange power, the M370 is essentially a modified HR manifold.

This looks like someone adapted it on their own.

I'm staring at a stock manifold right now on my bench and that isn't a stock 370 manifold, there should be 2 hose barbs on the front, and a pocket and port for the MAP sensor on the back top right side.
There should also be one more mounting tab on the front 90 degrees from the front left one.

Then yeah. HR manifold. Tril is correct.

Can you post pics of the holes? I wonder if they filled them in or said F-it

370Z JT

02-23-2015 05:40 PM

It should look just like the manifold on your car (Motordyne).

Schsplayer00

02-23-2015 06:15 PM

If it's a 350z manifold anyone have any ideas of a cover that I can get or get made to fit it? I wonder if the fitment is the same as the m370?? If so I bet motordynes cover would still fit it.

Schsplayer00

02-23-2015 06:29 PM

Quote:

Originally Posted by DEpointfive0 (Post 3120160)

Oh...

Then yeah. HR manifold. Tril is correct.

Can you post pics of the holes? I wonder if they filled them in or said F-it

I don't see the old holes so im guessing they filled them in.

Joepro

02-23-2015 06:48 PM

page 5...you can see them side by side...also I my engine cover fit not perfectly but still was able to go on but you do not have the m370 plate so the stock cover should fit just fine. The studs i nthe back are missing, either get new ones you just use 10mm bolts(what I did)

http://motordyneusa.com/wp-content/u...ION-MANUAL.pdf

Schsplayer00

02-23-2015 09:01 PM

Thanks for the input!!! I'll see if I can rig the stock one to look good if not I know I can get the Motordyne plate they told me I can order it by itself im just wondering if it will fit.. Is the Motordyne manifold and the 350z manifold the same on the exterior does anyone know??

Joepro

02-23-2015 09:16 PM

Th stock cover fits over this, it just bulges, so a stock cover will fit just fine on yours, just need the proper bolts quick trop to the auto parts store is all...

http://i609.photobucket.com/albums/t...ps2686281b.jpg

juld0zer

02-25-2015 05:24 PM

the install looks pretty neat. neater than the real M370

All times are GMT -5. The time now is 07:05 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page