Motion Lab has the engine components, forced induction kits, and clutches you need!!

Motion Lab

It's Thursday November 21st and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


Cusco LSD - Type RS: The Cusco Type RS LSD had proved to be capable of competition use in the All Japan Gymkhana Championship without overhauling a single time during the season. With all drivers and teams finishing with good or championship results at the end of the season. According to Cusco's in house research, initial torque is 50 to 70% lower compared to the conventional cone plate type LSD enabling lower drive friction and better response.

• Low power loss means better lap times for even the mild tuned of cars
• Chattering is kept low
• Improved durability as clutch plates are low pressured
• The LSD efficiency is higher with smoother oil flow between plates.
• Special precision springs, set in the pressure plate, assure steady coil movement
• Clutch plates do not stick together like conventional cone plate type LSDs. Therefore less clutch plate wear or deterioration occurs.

There are three ways to set your Cusco Limited Slip Differentials: 1 way, 1.5 way and 2 way.

• 1 way LSD: Specially suited for front wheel drive cars and AWD front axle cars. Activates under acceleration, and acts as a true LSD when the throttle is off. This CUSCO 1 way LSD will improve lap times without a doubt.
• 1.5 way LSD: Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.
• 2 way LSD: Recommended on rear wheel drive cars and AWD rear axle cars. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.

Okada Projects Plasma Direct: A revolution in ignition technology!! The Plasma Direct is the ignition coil with a high power amplifier built in to it. The Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Our Plasma Directs are OBD II compliant. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go! Plasma Direct is made to a specific application.

Highlights:

• 100% secondary current (Spark Amperage) increase
• 4 Times Spark Energy Increase for the initial spark discharge
• Easy installation. Only replace stock coils to Plasma Direct
• Compatible with all OEM components
• Compatible with OBD-II (On-Board-Diagnostics)

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance