DIY Evo-R front CF fangs?

CMadison · 01-15-2014, 12:47 PM

**UPDATE**
So last night I trimmed the underside of the CF fang cover. It ended up being about 1-1/2" that I had to cut off since the evo-r did not fit the fang profile perfectly. I also just buffed out the scratches that were made with the dry fitting I tried earlier, then covered all those areas with the 'frog tape' masking tape, which comes off very easily. That allowed me to dry fit the evo-r without scratching the paint. After three rounds of cutting, it finally slid on there. I think I'm just gonna completely cover the fang area with the frog tape before I mount the cover for good. This way it will come off clean if I ever want to remove it. I will post pics and stuff when I mount it, but the weather should be over 70 degrees for proper adhesive, so it may be a week or so.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Lips with Fangs	HoneyBadger	Exterior & Interior	11	09-30-2012 11:42 AM
Painted front fangs and rear diffuser.	JsnMR2	Member's 370Z Gallery	20	07-29-2012 10:24 PM
Front fangs poll....	370zsport09	Exterior & Interior	15	11-24-2010 11:33 PM
Front bumper fangs...	Push370zzz	Exterior & Interior	7	04-18-2010 09:45 PM
front fangs	Richie	Nissan 370Z General Discussions	34	12-08-2009 07:42 PM

01-15-2014, 12:47 PM	#13 (permalink)
CMadison Base Member Join Date: Aug 2013 Location: Lubbock, Tx Posts: 226 Drives: '12 PW T/S 6MT Rep Power: 12	UPDATE So last night I trimmed the underside of the CF fang cover. It ended up being about 1-1/2" that I had to cut off since the evo-r did not fit the fang profile perfectly. I also just buffed out the scratches that were made with the dry fitting I tried earlier, then covered all those areas with the 'frog tape' masking tape, which comes off very easily. That allowed me to dry fit the evo-r without scratching the paint. After three rounds of cutting, it finally slid on there. I think I'm just gonna completely cover the fang area with the frog tape before I mount the cover for good. This way it will come off clean if I ever want to remove it. I will post pics and stuff when I mount it, but the weather should be over 70 degrees for proper adhesive, so it may be a week or so.