sorry bring the post back up, but i just did this install and the only thing i am concerned with is the hot glue on the mother board. will it ruin it in anyway, is their a certain place i just place the glue then others?

thanks

Started this mod tonight!

I added a connector so that I could unplug when pulling the console out. I'll crimp an RJ45 on the wiring and connect them with a coupler.

http://www.the370z.com/members/jayho...-rj45-plug.jpg

http://www.the370z.com/members/jayho...itch-blank.jpg

Finished up this mod... Pics!

http://www.the370z.com/members/jayho...52-coupled.jpg

http://www.the370z.com/members/jayho...p-detector.jpg

http://www.the370z.com/members/jayho...-installed.jpg

http://www.the370z.com/members/jayho...or-mounted.jpg

Hello gents, I realize how old this thread is but it helped me immensely. The only thing I had trouble with was running the signal wire from the mute button up the A-pillar to the radar detector.
It took me way too long to figure out that you can remove the door seal/weather strip. Made a vid just showing it in detail if anyone needs it
Thank you again for making the thread, my install came out great because of this and I couldn't have done it without it.

https://www.youtube.com/watch?v=jjYlPmnzir4