Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)
-   -   DIY: Center Console Mounted Radar Detector Mute Button (http://www.the370z.com/diy-section-do-yourself/8285-diy-center-console-mounted-radar-detector-mute-button.html)

TycoRC 02-13-2011 04:58 AM

Nice write up, have you ever considered Mikes mount or blendmounts for your radar?

Colonel 02-13-2011 08:35 PM

do you have images of the mounts?
Quote:

Originally Posted by TycoRC (Post 939228)
Nice write up, have you ever considered Mikes mount or blendmounts for your radar?


eddieconfetti 03-29-2011 03:37 PM

I really want to do this but im afraid to do it. I know ill mess up some where. What would the difficulty rating be on this diy. Im a noob with wiring cutting and drilling. Im more of a direct bolton guy.

kidkotic2001 05-06-2011 01:00 AM

Nice I will be doing this mod.

Footloose301 05-06-2011 05:31 AM

Quote:

Originally Posted by eddieconfetti (Post 1019548)
I really want to do this but im afraid to do it. I know ill mess up some where. What would the difficulty rating be on this diy. Im a noob with wiring cutting and drilling. Im more of a direct bolton guy.

Its actually fairly easy. The hardest part(which is not hard), is using the dremel tool to make three holes in the switch blank. Other than that it is easy. I'd say 3/10 for difficulty.

Vapiano 09-04-2011 10:07 PM

Completed this today, I absolutely love it, looks standard. My buddies thought it came with the car!!!!

dilly84 04-11-2012 02:59 PM

another tip for this is a company called k40. installed in front and rear bumpers. Guaranteed no tickets. if you get one they'll pay it.

Wiggins3377 05-14-2012 08:49 AM

Just wondering where everyone connected the power wire. Has anyone spliced it into the power wire for the mirror?

djtodd 08-16-2012 11:13 AM

I tapped into the power wire for the console lighter plug. Te harness is right in front of the shifter once you pull the shift boot up. It's a two prong harness. One yellow wire(12v switched) one ground (probably black, but I don't remember specifically). Tap or splice into it there. Piece o cake.

starview 05-23-2013 04:38 PM

1 Attachment(s)
Anyone have a clean place to mount the new escort live direct wire control box? It's a little larger than the one in the OP so it will not fit in a switch blank.

Grindkiezer 09-07-2013 01:10 PM

I know this post will bring up an old tread, but the only part that I am lost on is how you run the wire from the detector up through the headliner and down to the center console button. Or is that even how you do it?

Bananaz 02-10-2014 12:09 PM

Not sure which kit I can use for my Cobra detector.. the one I looked at had a telephone jack looking piece. I have a normal ring/laptop looking input for my detector.

Brad370 02-10-2014 12:35 PM

Quote:

Originally Posted by Bananaz (Post 2686912)
Not sure which kit I can use for my Cobra detector.. the one I looked at had a telephone jack looking piece. I have a normal ring/laptop looking input for my detector.


Search amazon for 'cobra hard wire kit'

Bananaz 02-10-2014 12:40 PM

Quote:

Originally Posted by Brad370 (Post 2686954)
Search amazon for 'cobra hard wire kit'

Tried that. I mean they do have kits but none that I saw had a mute button or anything

Sent from my SCH-I545 using Tapatalk

Brad370 02-10-2014 12:42 PM

A barrel jack only has power and ground (2 wires) so there's no way to do mute with that. Unless there's some other port on the detector.


All times are GMT -5. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2