Mirro Tap

kidkotic2001 · 11-06-2012, 11:13 AM

So I replaced my old escort radar detector with a new Beltronics one. While purchasing this on Amazon I fell upon a product called Mirrortap. It is to hardwire your radar detector.

Has anyone installed this, if you have were do the two wires hook up to. I have no clue how to use a 12+ volt voltometor or what ever they are called. I would like to purchase this but I need to know where the two hook ups will go to on the back of the rear view mirror connector.

Chuck33079 · 11-06-2012, 01:21 PM

I used an Invisicord, not a Mirror Tap, but I'd assume it's the same. I used this writeup and it worked fine. Easy & Clean Radar Install

pbhakta · 11-06-2012, 03:07 PM

I bought the Mirrortap for my Beltronic rx65 radar. Mine ended up being that the Red wire in the harness was the 12V and the Ground was the Black. Matched up Red to Red, Black to Black and everything was set and ready to go.

kidkotic2001 · 11-07-2012, 11:42 AM

Thanks to both of you I will try your set up pbhakta.

11-06-2012, 11:13 AM	#1 (permalink)
kidkotic2001 Track Member Join Date: Feb 2011 Location: El Paso, TX Posts: 541 Drives: Like Crazy Rep Power: 15	Mirro Tap So I replaced my old escort radar detector with a new Beltronics one. While purchasing this on Amazon I fell upon a product called Mirrortap. It is to hardwire your radar detector. Has anyone installed this, if you have were do the two wires hook up to. I have no clue how to use a 12+ volt voltometor or what ever they are called. I would like to purchase this but I need to know where the two hook ups will go to on the back of the rear view mirror connector. __________________ ThAt WaS a CrAzY nIgHt

11-06-2012, 03:07 PM	#3 (permalink)
pbhakta Enthusiast Member Join Date: Dec 2011 Location: Kansas City Posts: 333 Drives: 11 GM 370z T/S 6MT Rep Power: 13	I bought the Mirrortap for my Beltronic rx65 radar. Mine ended up being that the Red wire in the harness was the 12V and the Ground was the Black. Matched up Red to Red, Black to Black and everything was set and ready to go. __________________ 2011 6MT 370Z Gun Metallic :: Stillen G3 CAI :: Swift Springs :: EvoR :: JWM LEDs :: TommyKaira :: Forgestar F14 :: Motordyne Shockwave))) E370 :: CS Spec-Me Lip :: AeroJacket

11-07-2012, 11:42 AM	#4 (permalink)
kidkotic2001 Track Member Join Date: Feb 2011 Location: El Paso, TX Posts: 541 Drives: Like Crazy Rep Power: 15	Thanks to both of you I will try your set up pbhakta. __________________ ThAt WaS a CrAzY nIgHt

11-06-2012, 01:21 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	I used an Invisicord, not a Mirror Tap, but I'd assume it's the same. I used this writeup and it worked fine. Easy & Clean Radar Install